iPhoneRoot.com       

News tagged ‘анлок’


New Unlock works for all iPhone 4S, iPhone 4, iPhone 3GS, all 5.x firmwares, all basebands





unlock1 unlock1

A new unlock has been discovered that works for all iPhones and all 5.x firmware versions, all basebands are supported.

The method discovered by Loktar_Sun appears to exploit a logical bug in Apple's server and can be performed on any jailbroken iOS device. His procedure involves using Sam Bingner's SAM (Subscriber Artificial Module) package to perform a series of steps that unlocks your phone to use a specific SIM.

It has been confirmed working by iPhone Dev-Team member MuscleNerd who notes an update may be coming to SAM from @sbingner to make the procedure simpler.

We will post detailed step by step unlock instructions soon.

UPDATE: Tutorial is ready! You can find it here.




|
   

Leave a comment, read comments [8]

Step-by-step Tutorial: How to (Un)Tether Jailbreak and Unlock iPhone 3GS Using Sn0wBreeze 2.9.3 (Windows) [iOS 5.1]



iphone-3gs-windows-custom-sn0wbreeze-51

UPDATE: Apple released iOS 5.1.1 and has stopped signing iOS 5.1, so you can NOT restore to 5.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.1 you can jailbreak with redsn0w. iOS is also tethered jailbreakable with redsn0w.

Using this tutorial you will be able to create a custom firmware, tether jailbreak and unlock iOS 5.1 running on iPhone 3GS. This tutorial uses Sn0wBreeze 2.9.3 for Windows.

If you have iPhone 3GS with an old bootrom version 359.3, the jailbreak is untethered. If your device has bootrom version 359.3.2 and higher, jailbreak will be tethered. You can detect your bootrom version using this tutorial.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run iBooty.

Sn0wBreeze will also preserve baseband version if you need carrier unlock. It can also update your modem version to 06.15 if you need unlock and stuck with 05.14 or higher baseband. If you have new iPhone 3GS that was made after 28 week of 2011 upgrading modem will not help to unlock.


Read the rest of this entry »




|
   

Leave a comment, read comments [84]

Step-by-step Tutorial: How to Tether Jailbreak and Unlock iPhone 4 Using Sn0wBreeze 2.9.3 (Windows) [iOS 5.1]



iphone-4-windows-custom-sn0wbreeze-51

UPDATE: Apple released iOS 5.1.1 and has stopped signing iOS 5.1, so you can NOT restore to 5.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.1 you can jailbreak with redsn0w. iOS is also tethered jailbreakable with redsn0w.

Using this tutorial you will be able to create a custom firmware, tether jailbreak and unlock iOS 5.1 running on iPhone 4. This tutorial uses Sn0wBreeze 2.9.3 for Windows.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run iBooty.

Sn0wBreeze will also preserve baseband version if you need carrier unlock.


Read the rest of this entry »




|
   

Leave a comment, read comments [29]

Step-by-step Tutorial: How to (Un)Tether Jailbreak and Unlock iPhone 3GS Using RedSn0w 0.9.10 (Windows) [iOS 5.1]



iphone-3gs-windows-51

UPDATE: Apple released iOS 5.1.1 and has stopped signing iOS 5.1, so you can NOT restore to 5.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.1 you can jailbreak with redsn0w. iOS is also tethered jailbreakable with redsn0w.

This is step-by-step instructions on how to perform jailbreak and unlock of your iPhone 3GS on iOS 5.1 firmware using RedSn0w 0.9.10 for Windows.

If you have iPhone 3GS with an old bootrom version 359.3, the jailbreak is untethered. If your device has bootrom version 359.3.2 and higher, jailbreak will be tethered. You can detect your bootrom version using this tutorial.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.


Read the rest of this entry »




|
   

Leave a comment, read comments [152]

Step-by-step Tutorial: How to Tether Jailbreak iPhone 4 Using RedSn0w 0.9.10 (Windows) [iOS 5.1]



iphone-4-windows-51

UPDATE: Apple released iOS 5.1.1 and has stopped signing iOS 5.1, so you can NOT restore to 5.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.1 you can jailbreak with redsn0w. iOS is also tethered jailbreakable with redsn0w.

This is step-by-step instructions on how to perform tethered jailbreak of your iPhone 4 on iOS 5.1 firmware using RedSn0w 0.9.10 for Windows.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.


Read the rest of this entry »




|
   

Leave a comment, read comments [125]

Sn0wBreeze 2.9.3 released: bugfixes and Apple TV 2G support



sn0wbreeze-293

iH8sn0w has released new version of popular jailbreak utility Sn0wBreeze 2.9.3.

What is New?

  • Added Apple TV 2 support for iOS 4.4.3/4.4.4.
  • Fixed rare issues with iOS 5.0.1 where it would halt on the Apple upon boot.

Just adding this in mainly for users who dumped their SHSH blobs. On the initial boot, the Apple TV may have a black screen for 60 seconds after setting up the Apple TV. This is normal.

You can download Sn0wBreeze 2.9.3 here.




|
   

Leave a comment

Sn0wBreeze 2.9.2: Tethered Jailbreak for iOS 5.1



snowbreeze-292

iH8sn0w has released new version of popular jailbreak utility Sn0wBreeze 2.9.2. Sn0wbreeze is used to create a custom firmware with jailbreak and preserve iPhone modem (baseband) version for unlock. New version 2.9 adds support for untethered iOS 5.0.1 jailbreak as well as support for all firmwares supported by previous versions of sn0wbreeze.

Version 2.9.2 features tethered iOS 5.1 jailbreak for iPhone 3GS, iPhone 4, iPad 1, iPod Touch 2G, iPod Touch 3G and iPod Touch 4G.

You can download Sn0wBreeze 2.9.2 here.

Unlockers should update only via custom firmware. Ultrasn0w for iOS 5.1 with old basebands will be released soon.




|
   

Leave a comment, read comments [26]

Apple Releases iOS 5.1: What's new?



ios-51-update-ipad

Apple has released the iOS 5.1 firmware for the iPhone, iPad, and iPod touch. It has also released iOS 5.0 for the Apple TV.

You can find links to downloading the latest firmware versions here:

What's new:


Read the rest of this entry »




|
   

Leave a comment, read comments [20]

CutYourSIM offers remote unlock for AT&T iPhones



iphone-unlock

CutYourSIM is once again offering permanent remote unlocks for the iPhone 3G, iPhone 3GS, iPhone 4 and iPhone 4S for AT&T devices.

We are proud to offer a permanent unlock solution for your AT&T iPhone. Having your iPhone remotely unlocked will allow you to use your iPhone on any GSM carrier. All you need to do is choose the carrier your iPhone is LOCKED to, provide us with your IMEI number, and purchase this service. We will then permanently unlock your iPhone remotely (usually 5-15 business days. This service works for all AT&T iPhones, the 3G, 3GS, 4, and 4S

In the past, CutYourSIM offered remote unlocks but were forced to shut down their service. Apparently, they managed to find someone to whitelist IMEIs the same way a 'legit' unlock by Apple would be performed. It is still unknown if this service actually works, since no reviews from hackers or even users are available.

CutYourSIM wants $185 for the AT&T iPhone unlock service. You can check out their site here.




|
   

Leave a comment

Gevey Ultra S Will Unlock Your iPhone 4S



ultra-s

Gevey has announced the Gevey Ultra S SIM interposer which unlocks iPhone 4S without the need for dialing 112 or jailbreaking. The makers claim to be using a new exploit that 'fully unlocks' the device.

Pre-Order ONLY (Shipping ETA Between March 3-March 7)

GEVEY Ultra S for GSM iPhone 4S

  • No Need to Dial International Emergency Number 112
  • Untethered Unlock with no Jailbreak Required
  • Compatible with all GSM iPhone 4S SIM Cards (Does not work on CDMA iPhone)
  • Complete Unlock with all 2G and 3G data services
  • No SIM Card Cutting or Physical Modifications
  • Works on iOS 5.0, 5.0.1
  • Works on Baseband 1.0.11, 1.013, 1.0.14
  • Guaranteed Better Reception than Previous
  • Decreased Power Consumption

Gevey Ultra S is available for $54.99 here.

Take a look at video demonstration:


Read the rest of this entry »




|
   

Leave a comment

Step-by-step Tutorial: How to UnTether Jailbreak and Unlock iPhone 4 Using Sn0wBreeze 2.9.1 (Windows) [iOS 5.0.1]



iphone-4-windows-custom-sn0wbreeze

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

Using this tutorial you will be able to create a custom firmware, jailbreak and unlock iOS 5.0.1 running on iPhone 4. This tutorial uses Sn0wBreeze 2.9.1 for Windows.

Jailbreak is untethered. Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Sn0wBreeze will also preserve baseband version if you need carrier unlock.


Read the rest of this entry »




|
   

Leave a comment, read comments [99]

Step-by-step Tutorial: How to UnTether Jailbreak and Unlock iPhone 3GS Using Sn0wBreeze 2.9.1 (Windows) [iOS 5.0.1]



iphone-3gs-windows-custom-sn0wbreeze

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

Using this tutorial you will be able to create a custom firmware, jailbreak and unlock iOS 5.0.1 running on iPhone 3GS. This tutorial uses Sn0wBreeze 2.9.1 for Windows.

Jailbreak is untethered. Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Sn0wBreeze will also preserve baseband version if you need carrier unlock. It can also update your modem version to 06.15 if you need unlock and stuck with 05.14 or higher baseband. If you have new iPhone 3GS that was made after 28 week of 2011 upgrading modem will not help to unlock.


Read the rest of this entry »




|
   

Leave a comment, read comments [145]

Step-by-step Tutorial: How to create custom firmware for iPhone 4 using RedSn0w 0.9.10 (Windows) [iOS 5.0.1]



iphone-4-windows-custom

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to create custom firmware, update to iOS 5.0.1 and perform untethered jailbreak of your iPhone 4 using RedSn0w 0.9.10 for Windows. It will also preserve baseband version if you need carrier unlock.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.


Read the rest of this entry »




|
   

Leave a comment, read comments [184]

Step-by-step Tutorial: How to create custom firmware for iPhone 3GS using RedSn0w 0.9.10 (Windows) [iOS 5.0.1]



iphone-3gs-windows-custom

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to create custom firmware, update to iOS 5.0.1 and perform untethered jailbreak of your iPhone 3GS using RedSn0w 0.9.10 for Windows. It will also preserve baseband version if you need carrier unlock. If you have updated the baseband to version 06.15, you can use this tutorial to update to iOS 5.0.1.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.


Read the rest of this entry »




|
   

Leave a comment, read comments [111]

Step-by-step Tutorial: How to Untether Jailbreak iPhone 4S Using Absinthe (Windows) [iOS 5.0, iOS 5.0.1]



absinthe-win-iphone4s

UPDATE: Apple released iOS 5.1 firmware. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more. If you are on 5.0.1 you can jailbreak with Absinthe.

This is step-by-step instructions on how to perform untethered jailbreak of your iPhone 4S on iOS 5.0 or iOS 5.0.1 firmware using Absinthe for Windows.

Tutorial for Mac OS version is here.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.


Read the rest of this entry »




|
   

Leave a comment, read comments [342]