iPhoneRoot.com       

News tagged ‘pwnagetool’


Step-by-step Tutorial: How to Jailbreak and Unlock Your iPhone 3G Using PwnageTool 4.1.3 (Mac OS) [iOS 4.2.1]





pwnagetool413-3gs-3

UPDATE: Обязательно (!) думайте перед тем, как что-нибудь сделать. Читайте внимательно и еще раз думайте. Не понятно - читайте снова. Спрашивайте до, а не после.

UPDATE 2: Если у вас 05.13 baseband и ниже - она ломается старыми способами, не надо обновляться до 05.14, 05.15 и 06.15. Хочется перейти на 4.1/4.2 - тогда делайте кастом прошивку с помощью pwnagetool.

UPDATE 3: Обновив версию baseband до iPad для анлока iPhone можно потерять GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Данное пошаговое руководство позволит вам сделать джейлбрейк и анлок iPhone 3G на iOS 4.2.1 с помощью PwnageTool 4.1.3 под Mac OS X. Здесь также будут даны инструкции по обновлению baseband, если это необходимо для анлока (отвязки от оператора сотовой связи).

Для iPhone 3GS используйте руководство для iPhone 3GS.

Для пользователей Windows есть соответствующее пошаговое руководство.

Шаг 1
Создайте папку "Pwnage" на десктопе. Скачайте в нее все необходимое:


Read the rest of this entry »




|
   

Leave a comment, read comments [31]

Ultrasn0w unlock is being released



ultrasn0w-421-release

This is the tweet from MuscleNerd posted a minute ago. So it is just minutes to wait for new unlock utility ultrasn0w.

UPDATE: New ultrasn0w released! New PwnageTool 4.1.3 released. Read carefully this post from DevTeam first, then reread again!

UPDATE 2: new ultrasn0w 1.2 supports the following basebands:

  • iPhone 4: 01.59.00
  • iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

UPDATE 3: Step-by-step Tutorial: How to Jailbreak and Unlock

Read the rest of this entry »




|
   

Leave a comment, read comments [24]

Jailbreak iOS 4.2: what can we expect?



iOS 4.2 Jailbreak

Next iPhone/iPod/iPad firmare iOS 4.2 is due out soon. What can we expect in terms of jailbreaking 4.2?

Limera1n exploit for 4.2 in most cases is a tethered jailbreak. That means if you have to reboot your device, it will show a "connect to itunes" logo until you run the jailbreak software again.

  • iPhone 3G - will run 4.2 untethered. Redsn0w will be updated.
  • iPhone 3GS - old bootrom will run 4.2 untethered if done via Pwnagetool while updating from 4.1. Otherwise it will be tethered.
  • iPhone 4 - tethered
  • iPod 2G - untethered.
  • iPod Touch 3G, iPod Touch 4G - tethered
  • iPad - tethered.

Tethered jailbreak isn’t that bad for iPads and iPods. But if something happens and your iphone reboots while you’re away from your computer, you cant use the device until you get home and run some tool on your computer again.

We suggest not updating until new expoit will be implemented in new utility.

The community is working on a solution to this to either make the jailbreak untethered or at least semi-tethered. Semi-tethered means the device will at least reboot, but unjailbroken while on the road until you return to your computer.




|
   

Leave a comment

PwnageTool 4.1.2 is now available



Just a day after PwnageTool 4.1.1 release, DevTeam created one more update for popular jailbreak utility - PwnageTool 4.1.2 for Mac OS X. This release should solve some problems that users had. However there are still users reporting iTunes errors when restoring custom firmware. Anyway PwnageTool 4.1.2 is worth trying.

You can download PwnageTool 4.1.2 here.

Here is a step-by-step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.




|
   

Leave a comment

PwnageTool 4.1.1 is now available



Today DevTeam released new version of jailbreak utility PwnageTool 4.1.1 for Mac OS X. This release solves some of the problems with the previous version 4.1. Many users had errors with restore process, some had Cydia crashes. If you had any problems with PwnageTool 4.1 - we recommend you try to use the new version PwnageTool 4.1.1.

You can download PwnageTool 4.1.1 here.

Here is a step-by-step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.1.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.




|
   

Leave a comment

Step-by-step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac)



These are instructions on how to jailbreak your iPhone using PwnageTool 4.1.2 for Mac OS X. If you need unlock and you have not updated to iOS 4 you will be able to preserve baseband and unlock iPhone using ultrasn0w.

This guide will work for iPhone 4, iPhone 3GS, iPhone 3G, iPod Touch 3G, iPod Touch 4G, iPad and AppleTV. Just use the right firmware and select the right device (step four).

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Step One
Make a folder called "Pwnage" on the desktop. Now you need to download there PwnageTool 4.1.2 from here and iOS 4.1 firmware from here.

When downloading the IPSW file, it is best to download it with Firefox since Safari often auto extracts it!

pwnagetool-41-1

Step Two
Double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder.


Read the rest of this entry »




|
   

Leave a comment, read comments [33]

PwnageTool 4.1 released



The iPhone DevTeam has just released jailbreak utility PwnageTool 4.1 for Mac OS X.

PwnageTool allows you to restore to a custom IPSW file. The main advantage of PwnageTool is for unlockers. It gives the ability to keep current baseband and preserve ultrasn0w unlock. This is only for those, who have not updated to iOS 4.1 by themseleves.

You can also add whatever packages you want in the “Expert” mode of PwnageTool, if you wish to pre-install something from Cydia.

Here is a list of supported devices:

  • iPhone4
  • iPhone 3GS
  • iPhone 3G
  • iPad (firmware 3.2.2)
  • AppleTV 2G
  • iPod touch 4G
  • iPod touch 3G

You can download PwnageTool 4.1 here.

UPDATE: PwnageTool 4.1.1 is now available

Here is a step-by-step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.1.




|
   

Leave a comment

DevTeam published first screenshot of PwnageTool 4.1 for iPhone and other Apple devices



MuscleNerd, a hacker from DevTeam, recently published a screenshot of anticipated jailbreak utility PwnageTool 4.1. It will support iOS 4.1 and will be able to preserve old baseband for unlockers, who have not updated to iOS 4.1.

From the screenshot we can tell that PwnageTool 4.1 will support:


Read the rest of this entry »




|
   

Leave a comment

DevTeam found a way to jailbreak all firmwares of Apple devices with A4 chip



The iPhone DevTeam have probably found a new method to jailbreak Apple devices with the A4 chip. This includes such devices as iPhone, iPad, iPod and Apple TV. This is great news!

MuscleNerd tweeted.

Think we've figured out a way to extend PwnageTool+limera1n+@comex hacks to untethered JBs for all future A4 firmwares :)




|
   

Leave a comment

PwnageTool with Limera1n exploit preview video



MuscleNerd from DevTeam has posted a video preview of the new PwnageTool upcoming release. The new PwnageTool will use Geohot's Limera1n exploit and will let users who need unlock to obtain it. Here's MuscleNerd message from twitter:

Nerd alert: geohot's limera1n in PwnageTool... iTunes restoring iPad to pre-JB 3.2.2 (AppleTV next!) http://is.gd/g37Lm

Let's watch the video:


Read the rest of this entry »




|
   

Leave a comment

Limera1n Jailbreak for iPhone/iPod/iPad is now available for Mac OS



Geohot has just released his Limera1n jailbreak for Mac OS X. Limera1n supports the following Apple devices:

  • iPhone 4
  • iPhone 3GS
  • iPod Touch 4G
  • iPod Touch 3G
  • iPad
  • AppleTV (limited).

Limera1n was the first jailbreak utility to support iOS 4.1. It also works with iOS 4.0, iOS 4.0.1 and iOS 4.0.2.

Remember if you need an unlock do not upgrade to iOS 4.1, just wait for the next PwnageTool release.

You can find our LimeRa1n tutorials tutorials:

You can download Limera1n from here

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.




|
   

Leave a comment

Pwnagetool for iPhone with iOS 4.1 will be released by Sunday



Hacker MuscleNerd has tweeted that the DevTeam plans to release PwnageTool for iOS 4.1 in several days.

For AppleTV 2G users, the goal is for PwnageTool to cover you by Funday/Sunday (but still very limited app capability)

This release should also bring jailbreak for iPod touch and iPad Mac users.

PwnageTool is a Mac OS X jailbreak tool. One of it's advantages is the ability to preserve old baseband, which means you can have firmware iOS 4.1 with baseband from iOS 4.0 (if you haven't updated to 4.1 already). And this brings unlcok, because iOS 4.0 is unlockable.


Read the rest of this entry »




|
   

Leave a comment, read comments [2]

iPhone iOS 4.1 Jailbreak Released from GeoHot, called LimeRa1n



Famous hacker Geohot is back and today he released the latest iOS 4.1 jailbreak. It is called LimeRa1n and supports iPhone 3GS, iPod Touch 3G, iPad, iPhone 4, iPod Touch 4G with iOS firmwares 4.0-4.1 and beyond. It can also hacktivate your device, so there is no need in phone SIM-cards and other tricks.

This software is still in beta and was updated 3 times in last several hours. So use with caution.

There is Windows version only for now. Geohot plans to release LimeRa1n for Mac and Linux soon. You can Download it here.

Some users report that they have jailbroken their iOS 3.2.2 iPads successfully with limera1n, while others report that they tried, but failed.

Do not forget to backup.

For many users of iPhone 3GS and iPhone 4 with iOS 4.0.2 now there is a hope to perform jailbreak using LimeRa1n and unlock using ultrasn0w. We recommend NOT to do it if you have not saved your SHSH keys. You can try, but if something goes wrong without SHSH keys you'll have to restore to iOS 4.1, and there is no unlock for iOS 4.1 (possibly forever). Just wait for PwnageTool utility.

DevTeam reported that Limera1n uses a different exploit than SHAtter, so they will not release SHAtter utility, they don't want let Apple fix both security holes. However they plan to release PwnageTool using the same exploit.

You can find our LimeRa1n tutorials tutorials:


Read the rest of this entry »




|
   

Leave a comment

Jailbreak iOS 4.1 with RedSn0w 0.9.6 b1 is now available for Windows



redsn0w-0-9-6-b1

RedSn0w 0.9.6 b1 for Mac OS X was released a while ago. Today DevTeam created a version for Windows users. RedSn0w 0.9.6 b1 can jailbreak iOS 4.1 and iOS 4.1 running on iPhone 3G or iPod touch 2G.

You can download it here.

Redsn0w is easy to use:

  1. Download firmware here.
  2. Launch redsn0w 0.9.6 b1
  3. Select your stock 4.1 or 4.0 ipsw (you’ve already used this to update your device to 4.1 or 4.0)
  4. Select “Install Cydia” and any of the other options shown above, then click “Next”. Use DFU mode to install the jailbreak.

This is still beta, so there might be some problems:

Any Windows users seeing “Waiting for reboot” for too long (more than 20 seconds or so), please try “shaking” the JB process by unplugging then replugging your USB cable (while letting redsn0w continue to run). Also, try using a USB port “closer” to your computer (as opposed to on your monitor or behind another hub).

As usual DevTeam reminds us:

IF YOU USE THE ULTRASN0W UNLOCK, PLEASE WAIT FOR PWNAGETOOL TO SUPPORT 4.1. DO NOT USE REDSN0W

That’s because to use redsn0w at 4.1, you need to already have updated to official 4.1 from Apple. If you do that, you lose the ultrasn0w unlock (possibly forever).




|
   

Leave a comment, read comments [3]

Jailbreak iOS 4.1 with RedSn0w 0.9.6 b1



redsn0w-0-9-6-b1

DevTeam recently released new version of redsn0w to jailbreak iOS 4.1. New RedSn0w 0.9.6 b1 supports iOS 4.0 and iOS 4.1 running on iPhone 3G or iPod touch 2G.

There is only Mac OS X x86 version, that you can download here.

Redsn0w is easy to use:

  1. Download firmware here.
  2. Launch redsn0w 0.9.6 b1
  3. Select your stock 4.1 or 4.0 ipsw (you’ve already used this to update your device to 4.1 or  4.0)
  4. Select “Install Cydia” and any of the other options shown above, then click “Next”.  Use DFU mode to install the jailbreak.

As usual DevTeam reminds us:

IF YOU USE THE ULTRASN0W UNLOCK, PLEASE WAIT FOR PWNAGETOOL TO SUPPORT 4.1.  DO NOT USE REDSN0W

That’s because to use redsn0w at 4.1, you need to already have updated to official 4.1 from Apple.  If you do that, you lose the ultrasn0w unlock (possibly forever).




|
   

Leave a comment