iPhoneRoot.com       

Ultrasn0w unlock is being released





ultrasn0w-421-release

This is the tweet from MuscleNerd posted a minute ago. So it is just minutes to wait for new unlock utility ultrasn0w.

UPDATE: New ultrasn0w released! New PwnageTool 4.1.3 released. Read carefully this post from DevTeam first, then reread again!

UPDATE 2: new ultrasn0w 1.2 supports the following basebands:

  • iPhone 4: 01.59.00
  • iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

UPDATE 3: Step-by-step Tutorial: How to Jailbreak and Unlock

UPDATE 4: DevTeam server is down. Here is what was on their blog:

Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04.  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP. The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

SIMPLIFIED VERSION:

  1. Read and fully understand the warning below.
  2. If you have an old-bootrom 3GS and are already unlockable but want to get to 4.2.1, please wait til we release an “unofficial” bundle for you.  Read no further.
  3. Read update #1 for an updated 3GS bundle.
  4. Download this IPSW
  5. Run PwnageTool to create a custom 4.1 IPSW.  Tell it you want to use the iPad baseband you just downloaded.  Restore to this custom IPSW.
  6. Install ultrasn0w through Cydia
  7. Enjoy!
  8. If you don’t have a Mac, redsn0w will be released within a few hours to handle this.

FULL VERSION:

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

  1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
  2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repo http://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
  3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

  1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
  2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
  3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool! Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!

Official Bittorrent Releases

PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

Unofficial Mirrors

The following links are unofficial download mirrors, you download these archives at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links and we accept no responsibility with regard to the validity of the files, the other content that these links may provide or with the content that is on the third-party linked site.

Always check the files that you have downloaded against our published SHA1 hash.

We would prefer that you downloaded the official bittorrent release that is linked above, but you are welcome to try these if you really must.

Mirror owners should email direct dmg download links only (no rapidshare type sites please) to blog@iphone-dev.org — please don’t place mirrors in the comments as they will be deleted.

Update #1: There’s an error in the bundle for the iPhone3GS 4.1 that prevents the new baseband from being used.  If you know your way around OSX, please download the fixed bundle, and unzip it if Safari hasn’t already done so.  Then “Show Package Contents” of PwnageTool.app, navigate to Contents->Resources->FirmwareBundles and drop it there.   Otherwise, please wait for the updated PwnageTool, or the OSX version of redsn0w coming soon.





Follow us on Twitter:     


| |




   

Leave a comment, read comments [24]

24 Responses to 'Ultrasn0w unlock is being released'

Subscribe to comments with RSS

  1. READY STADY GO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    [Reply]

    Roman

    29 Nov 10 at 12:39 am

  2. они предлагают владельцам iPhone 3G\3Gs обновить baseband до iPad 6.15.00 и использовать существующий эксплойт.... таким образом дальнейшие исправления ошибок и уязвимостей в baseband от Apple будут недоступны впринципе, пока не выйдет iPhone baseband 6.15.01

    варианты?

    [Reply]

    nyak

    29 Nov 10 at 12:40 am

  3. Будет поддержка 4.2.1 ?

    [Reply]

    nyak Reply:

    да, описывается следующая схема:

    1. срочно качаете iPad1,1_3.2.2_7B500_Restore.ipsw (т.к. Apple скорее всего закроет эту версию из-за возможности её анлока)

    2. качаете специальную версию PwnageTool_4.1.3_Unlock_Edition

    3. Обновляете iPhone до последней версии через iTunes (4.1.2)

    4. запускаете PwnageTool и когда оно спросит надо ли перешить baseband до iPad 6.15.00 сказать "да" и указать где лежит файл скачаный в п.1

    5. качаете через Cydia ultrasn0w 1.2 и ваш телефон разлочивается.

    В итоге получаете телефон с iOs 4.2.1 baseband 6.15.00

    [Reply]

    nyak Reply:

    да, забыл упомянуть:
    для пользователей Windows PwnageTool не поможет. им придется ждать выхода соответствующей Redsn0w.
    схема таже, только вместо Pwnage используете Redsn0w.

    ссылка на ipsw:
    http://appldnld.apple.com/iPad/061-8801.20100811.CvfR5/iPad1,1_3.2.2_7B500_Restore.ipsw

    ссылка на .torrent PwnageTool:
    http://torrents.thepiratebay.org/5994102/PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

    зеркало PwnageTool:
    http://8sv.de/dl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg

    [Reply]

    admin Reply:

    многие зеркала тормозят, так что выложил еще сюда: http://iphoneroot.com/download/PwnageTool_4.1.3_Unlock_Edition.dmg

    [Reply]

    Roman

    29 Nov 10 at 12:42 am

  4. ОППА

    я кажется наврал про 4.1.2 на блоге dev-team обновили инфу:
    1. Read and fully understand the warning below.
    2. Download this IPSW
    3. Run PwnageTool to create a custom 4.1 IPSW. Tell it you want to use the iPad baseband you just downloaded. Restore to this custom IPSW.
    4. Install ultrasn0w through Cydia
    Enjoy!
    5. If you don’t have a Mac, redsn0w will be released within a few hours to handle this.

    тоесть
    1. Прочитать и понять риски обновления до 6.15
    2. скачать ipsw (тут всё верно)
    3. запустить Pwnage и создать custom ipsw 4.1 !!!!!!
    4. скачать ultrasn0w через cydia.
    5. если у вас Windows- придется ждать redsn0w/

    тоесть ОБНОВЛЯТЬ ДО 4.2.1 ЧЕРЕЗ iTunes НЕЛЬЗЯ!

    [Reply]

    Roman Reply:

    Я уже обновился, на 4.2.1 на Itunes, напиши возможные варианты анлока для моего случая понятнее.

    [Reply]

    admin Reply:

    какой айфон и какой сейчас baseband?

    [Reply]

    nyak

    29 Nov 10 at 1:17 am

  5. Сегодня судя по топику про анлок 4.2.1 я решил что baseband будет разлочен на этой версии прошивки, и обновился до 4.2.1 baseband:5.15.04, Iphone 3g, что мне делать ?????

    [Reply]

    admin Reply:

    пока я до конца не могу понять, но, судя по всему, зря обновление на 4.2.1 было.

    [Reply]

    Roman Reply:

    Не хочется пол года ходить с кирпичом......

    [Reply]

    admin Reply:

    да, вот что пишет MuscleNerd:

    "unlockers stuck at 05.14 or 05.15 must update(!) to 06.15 to regain the unlock. That's why PT and redsn0w are involved"

    [Reply]

    nyak Reply:

    просто попробуйте обновить как указано до 6.15.00 и скачать ultrasn0w 1.2

    если всё получится- отпишите.
    если не получится- ТЕМ БОЛЕЕ отпишите нам.

    [Reply]

    admin Reply:

    вроде как, вам надо с помощью новой pwnagetool обновить baseband до 6.15. но надо учитывать риск того, что потом, возможно, будут проблемы с обновлением на новые офф прошивки (но на кастом можно будет, если будут соотв тулзы)

    [Reply]

    Roman

    29 Nov 10 at 1:38 am

  6. У меня Windows, можно ссылку на pwnagetool ?

    [Reply]

    admin Reply:

    ссылка выше в комментах.
    pwnagetool только под mac os, для windows скоро выйдет Redsn0w.

    [Reply]

    Roman Reply:

    Благодарю, судя по комментам Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool. Сегодня должен состояться релиз.

    [Reply]

    Roman

    29 Nov 10 at 1:56 am

  7. Блин. Обновил телефон друга 3GS до 4.1 baseband 05.14.02 Неоффициальный. теперь немогу его разлочить? даунгрейд то тоже не поможет ибо как модем останется уже с новой прошой. эх.

    [Reply]

    admin Reply:

    какой бутром?

    [Reply]

    Dmitry

    29 Nov 10 at 6:50 am

  8. А есть ли вероятность, что 5.14.02 можно будет анлочить через ultrasnow? Спасибо!

    [Reply]

    admin Reply:

    если только devteam придумает кардинально новый способ. пока его нет.

    [Reply]

    Artur Reply:

    Ходят слухи, что разлочка для iphone 4 будет и на 5.14...5.15 работать... Ничего не слышали об этом?

    [Reply]

    admin Reply:

    слухи всегда ходят. Официально Devteam сейчас работает над двумя вещами - это разлочка iphone 4 и отвязанный джейлбрейк для нового бутрома.

    [Reply]

    Artur

    30 Nov 10 at 11:26 pm

Leave a Reply



You can login with iPhoneRoot account here.