News tagged ‘jailbreak’

The iPhone 2.1 is out. It contains the following updates as listed by Apple:

- decrease in call set-up failures andcall drops
- significantly improve battery life for most users
- dramatically reduced time to backup to iTunes
- improve email reliability, notable fetching email from POP and Exchange accounts
- faster installation of 3rd party applications
- fixed bugs causing hangs and crashes if you have lots of 3rd party applications
- improved performance of text messaging
- faster loading and searching of contacts
- improved accuracy of the 3G signal strength display
- repeat alert up to two additional times for incoming text messages
- option to wipe data after ten failed passcode attempts
- Genius playlist creation

The 2.1 firmware is build 5F136 (weighing in at 237.8MB) and can be directly downloaded through iTunes. The new firmware also contains a number of security fixes including the well publicized passcode flaw.

Jailbreak for 2.1 is not avaliable yet.

The only way Apple can fix the exploit that the iPhone Dev Team has been using to Jailbreak iPhone’s and iPod Touch’s is to fix their hardware, but it seems Apple has figured out a way to program iTunes 8 to detect and prevent the Pwnage exploit. The screenshot below from iTunes 8 using a Pwned ipsw (with an unPwned device attached) is one example.

The Dev Team reacted promptly:

“The nice thing about iTunes decisions is that we can provide you with patches to counter them. We have one such patch already for Mac iTunes 8 for iPod touch. We’ll be working out the full suite of patches for all the combinations over the next week.”

Dev Team also published two interesting screenshots:

There are so many tools, some for Mac OS, others for Windows, different versions... Complicated. So let's summerize a little bit.

If you have iPhone 3G, you'll be able to install 3-rd party non AppStore applications (through separate applications called Cydia and Installer) and run these applications. If you have old iPhone, in addition to that you'll be able to unlock the device (use with any carrier).

There are two methods: quickpwn and custom firmware method. First one is for quikly pwning and jailbreaking  the device without restore. You should use it if you have unlocked device or an AT&T contract.

If you are Windows user:

• Go for WinPwn. The current version is 2.5.0.2 (also called 2.5 beta-2). Download here. It supports both iPhone and iPhone 3G, firmwares 2.0, 2.0.1, 2.0.2. You can use either quickpwn or custom firmware method.
• There is a separate QuickPwn tool for Windows. The current version is RC3. Download here. Do you need it? Yes, if you want to quick pwn and you do not like WinPwn (or you had problems with it).

If you're using Mac OS:

• Go for PwnageTool. The current version is 2.0.3.1. Download here. Works with 2.0, 2.0.1, 2.0.2 firmwares using custom-firmware method.
• There is a version of QuickPwn tool for MAC OS. The current version is 1.0.0. Download here. It works only with firmware 2.0.2. Do you need it? Yes, if you want to quick pwn.
  QuickPwn is not a replacement for PwnageTool, they are different tools and provide different features, QuickPwn is for quickly pwning a device, whereas PwnageTool is designed to custom build and tailor the ipsw production process, both tools will be actively developed in the future.

Recently a new project has been started, called XiPhone. It will be based on XPWN. So functionality similar to WinPwn and Pwnage will be present (jailbreak, unlock, etc). In addition to that developers plan to include:

• Auto downloading of stock firmware files from apple’s site (no need to hunt for it then select it)
• Wizard based modern GUI (created with .net 2.0), and Vista Style UI.
• Export of firmware settings so users can pass around an XML file which contains a configuration that works for them.
• Auto updates to the XiPhone software.
• Community based wallpapers used for Bootscreen, Restore screen and others
• Enabling / Disabling of options available based on the device you select.

Unfortunately, only Windows platform users will be able to use XiPhone.

This is the most famous Windows-based utility to jailbreak and unlock Apple's iPhone and iTouch.

Release notes:

• The new nice interface
• Very very very easy to use
• QuickPwn Support for firmwares 2.0/2.0.1/2.0.2
• Root partition resize support
• Installer support
• Basic / Expert modes
• Wizard style interface
• Automatic updater
• Support for WinXP and Vista 32/64bit.

Notes:

• Why is it beta? It's just the saying.. Use at your own risk
• You MUST do a full uninstall of winpwn before installing the new version
• Make sure you have the latest version of iTunes (7.7 and above)

Bug fixes

• Crash when building ipsw
• Quickpwn crash bug fix

Download WinPwn 2.5.0.2: Rapidshare.com

Both ApolloIM and MobileChat were jailbreak applications for chatting on the go with your iPhone/iPod touch. Alex Schaefer, ApolloIM's founder, has recently joined the MobileChat development team. In a blog posting by the developer of MobileChat, he said that both applications underwent "friendly competition" and that, while there was no clear winner in the iPhone IM business, users got the benefit from the ongoing competition.

Now that Alex has joined the other team, you can expect that MobileChat will only get better. The post goes on to mention that Alex will be working on stability and user experience for the application.

via tuaw

PS: As for me, I like Agile Messanger much better.

WinPwn 2.5 is on it's way. The developer says, that the release will be later this week.

Features

• QuickPwn support (2.0/2.0.1/2.0.2)
• DFU helper
• Automatic updater (yay no more downloading new installers)
• Plus much more....

Screenshots:

Read the rest of this entry »

QuickPwn for Windows is updated. Support for all 2.x firmwares is added. So now you can QuickPwn and jailbreak the device if it is running 2.0, 2.0.1 or 2.0.2.

DevTeam reminds that it is still beta software, so usual rules apply, no complaints if anything goes wrong and use the tool at at your own risk!

Download here!

Using QuickPwn does not update the firmware itself, this tool is designed to ‘Pwn’ (the ability to install future custom non-Apple firmwares) , ‘Jailbreak’ and install Installer and/or Cydia on a given device. If your device is running 2.0.1 and you QuickPwn it, it’ll still be running 2.0.1, although it will now be Pwned and Jailbroken. It will also activate (not unlock) devices that are being used outside of their intended territories and cannot be activated using iTunes.

If you want to update to 2.0.2 then use the normal iTunes update to get to 2.0.2 and then use QuickPwn to Pwn, Jailbreak and Activate, remember that the 2.0.2 update includes a baseband update for the 3G iPhone, so depending what your long term intentions are for the phone, update wisely, of course in the upcoming PwnageTool application you’ll be able to create a custom ipsw without the baseband update enabled.

PS: Mac OS version is on it's way.

Apple just released new firmware for iPhone - version 2.0.2. As usual, all the company mentioned was that the update includes "Bug fixes."

Notes on the release follow:

• No new settings appear to have been included.
• Some users report faster browsing, though this may be due to cleared cache.
• Typing lag may be reduced.
• No consensus on improved 3G connectivity.
• iPod Touch firmware 2.0.2 also released.

But as always, do not update until we get word on a jailbreak.

Links for firmware downloads: iPhone 3G 2.0.2,  old iPhone 2.0.2.

DevTeam created a quick solution for jailbreaking an iPhone. It is called QuickPwn. It is in beta, so be careful. It will allow you to pwn (jailbreak) your device very quickly without restoring!

Who should use this tool? This is for those that are not planning to restore. It’s not clear what the activation state is after the process therefore, I only recommend this for those that have a contract carrier or an unlocked phone already.

If you are on a stock device and using AT&T or a contract carrier, this is the perfect jailbreak for you. You will not lose your contacts or have to do any backups. Finally, if you are going to restore anyway, especially if you need to unlock a 2g, you may as well use winpwn or such.

Currently QuickPwn requires your device to be running version 2.0.1 of the iPhone/iPod firmware. And it runs only on Windows. This requirement will change in a subsequent release.

You can download it here.

ZiPhone just posted some news on his blog:

"Next generation of ZiPhone is in the works.
It will be as simple as Apple would have done it.
A simple one click program.
A 5 seconds run.
Stay tuned."

Well, hopefully we'll see something soon.

PwnageTool 2.0.2 released just a day ago. And now WinPwn - iPhone jailbreaker and unlocker for windows is avaliable. The main new feature - it supports firmware 2.0.1.

Download 2.0.0.4: [Rapidshare.com] [Rapidshare.de]

Download firmwares: iPhone 1.1.4, 2.0, 2.0.1, iPhone 3G 2.0, 2.0.1

2.0.0.4 features:

• Support for both 1.1.4, 2.0, 2.0.1
• Root partition resize support
• Installer support
• Support for WinXP and Vista 32/64bit.

Notes are as usual:

• You MUST do a full uninstall of winpwn before installing the new version
• Make sure you have the latest version of iTunes (from 7.7)
• WinPwn uses 300MB of ram at peak due to the ipsw being extracted in memory
• You must first click browse and load an IPSW to use WinPwn (i thought this was clear)
• For 2.0 only the *5A347_Restore.ipsw files are valid. The 345 image will not work
• If you see Failed to load image catalog/payload catalog, this is fine and won’t cause problems
• If you already have service with AT&T do not activate or install Youtube Fix
• As usual jailbreak for iPhone and iPhone 3G, unlock only for iPhone.

• It is recommended to use at least 550mb partition size to accommodate a space issue that causes some folks errors such as “the ipsw failed to create”.

How to:

Read the rest of this entry »

PwnageTool 2.0.2 is out. It will support new firmware 2.0.1. It will jailbreak and unlock the old iPhone and jailbreak new iPhone 3G. Here are the download links:

• forty2blog.de
• stevenlu.com
• ZippyShare
• RapidShare

Installer 4 Beta is included, it is added in any mode by default.  The main installer package management interface within PwnageTool isn’t enabled yet, and will report that installer.app isn’t available, but the actual Installer.app package is added as a default option in both modes.

The latest Cydia is also enabled by default. We recommend to use Cydia, not Installer.

Bad news is that it is still not avaliable. DevTeam postponed their release. The good news is that version 2.0.2 will jailbreak 2.0.1 fimware (and unlock 2.0.1 for old iPhone) and have both Cydia and Installer 4 included. Stay tuned, the release will be in couple days.