iPhoneRoot.com       

Step-by-step Tutorial: How to Untether Jailbreak iPhone 4 Using PwnageTool 4.3.3.1 (Mac OS) [iOS 4.3.3]





pwnagetool-iphone4

Using this tutorial you will be able to untether jailbreak iOS 4.3.3 running on iPhone 4. Pwnagetool will also preserve baseband version if you need carrier unlock. This tutorial uses PwnageTool 4.3.3.1 for Mac OS X.

We are not developers of jailbreak utilities, so we cannot assure that everything will work just fine. However we tried this tutorial on several devices and succeeded.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

UPDATE: Apple released iOS 4.3.4 that is only tethered jailbreakable. Apple has stopped signing iOS 4.3.3, so you can NOT restore to 4.3.3 any more (both original and custom), unless you have saved your SHSH keys for 4.3.3.

If you are on 4.3.3 already - jailbreak with redsn0w or jailbreakme.

Proceed only if you have iOS 4.3.3 SHSH keys saved.

Step One
Make a folder called "Pwnage" on the desktop. Download a couple of things:

  • PwnageTool 4.3.3.1 from here

You will also need the 4.3.3 firmware.

When downloading the IPSW file, it is best to download it with Firefox since Safari often auto extracts it!

pwnagetool-iphone4-1

Step Two
Double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 2)

Then from the Pwnage folder double click to launch the PwnageTool application.

pwnagetool-iphone4-1

Click Ok if presented with a warning.

pwnagetool42-2

Step Three
Click to select Expert Mode from the top menu bar

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 5)

Step Four
Click to select your device. A check-mark will appear over the image of the device. Click the blue arrow button to continue.

pwnagetool-413-7

Step Five
You will be brought to the "Browse for IPSW" page. Click the Browse for IPSW... button.

pwnagetool-413-6

From the popup window select your iOS 4.3.3 firmware from the Pwnage folder then click the Open button.

pwnagetool-iphone4-3

Step Six

You will then be brought to a menu with several choices. Click to select General then click the blue arrow button.

pwnagetool-42-4

The General settings allows you to decide the partition size. Check Activate the phone if you are not with an official carrier then click the blue arrow button.

NOTE*: Deselect Activate if you have an iPhone legitimately activated on an official carrier.

pwnagetool-iphone3gs-4

The Cydia settings menu allows you to create custom packages so you do not have to manually install the necessary them later. If you do not want to install anything here go to next step.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 11 399x356)

Click to select the Download packages tab. Then click the Refresh button to display all the available packages. Double clicking the package you want will download it and make it available in the Select Packages tab.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 12 399x356)

Checkmark the ones you want then click the blue arrow button.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 13 399x356)

The Custom Packages Settings menu displays listed package settings for your custom IPSW. Click the blue arrow button to continue.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 14 399x356)

Click the blue arrow button to continue.

Step Seven
You are now ready to begin the pwnage process! Click the Build button to select it then click the Blue arrow button to begin.

pwnagetool42-5

Step Eight
You will be asked to save your custom .ipsw file. Save it to your Pwnage folder you created on your Desktop.

pwnagetool-iphone4-4

Your IPSW is now being built. Please allow up to 10 minutes.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 17 399x356)

You will be asked to enter your administrator password. Do this then click the OK button.

Step Nine

Once your ipsw has been built you will be asked to connect your iPhone to the computer. Once it detects your device PwnageTool will guide your through the steps to putting your iPhone into DFU mode.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 18 399x356)

Press and hold the power and home buttons for 10 seconds.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 19 399x356)

Then release the power button and continue holding the home button for 10 seconds.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 20 399x356)

Once your iPhone is successfully in DFU mode, PwnageTool will prompt you to launch iTunes.

Step by step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.2 (Mac) (pwnagetool 41 21 400x173)

Step Ten
Once In iTunes, hold the Alt/Option key and click Restore.
pwnagetool-413-12

Step Eleven
Navigate to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created and click the Choose button.

pwnagetool-iphone4-5

Step Twelve
iTunes will now restore the firmware on your iPhone. This can also take up to 10 minutes. Once done you will be rebooted into jailbroken iOS 4.3.3!

Step Thirteen
When your iPhone has restarted you can run Cydia. Let it do all the necessary updates.

To have access to the root file system of your iPhone (via file managers like iFunBox or iPhone Explorer) install application called afc2add in Cydia.

Step Fourteen
If you need carrier unlock – install ultrasn0w via Cydia (if you do not need carrier unlock skip this step). Ultrasn0w supports iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

  1. Open Cydia.
  2. Go to Manage than click Sources.
  3. If you see repository http://repo666.ultrasn0w.com, go to step 8.
  4. Click Edit button in the top right corner.
  5. Then click Add button in the top left corner.
  6. Type http://repo666.ultrasn0w.com and click Add Source.
  7. Then click Done.
  8. Click on on newly created repository http://repo666.ultrasn0w.com.
  9. Click on ultrasn0w and hit Install button in the top right.
  10. One installed, restart your iPhone.
  11. Disable 3G on T-Mobile USA.
  12. You're done! You should see the network.

Step Fifteen

Do not forget to change your default password if you've installed openssh.

[via iclarified]





Follow us on Twitter:     


| |




   

Leave a comment

Leave a Reply



You can login with iPhoneRoot account here.