iPhoneRoot.com

A new group of hackers claim they found a new exploit for the iPhone 3GS and iPod Touch with the new BootRom. This means that jailbreak for iPhone 3GS (late models) and iPod Touch 2G (MC) and iPod Touch 3G will be available.

We just found an amazing Exploit in the Boot-System of the 3GS with the new Bootrom! This Exploit works on ALL iPhone and iPod Touches!

The tool will be called Gull1hack. The operation is very simple and the code is sent when the device is in recovery mode, just like Blackra1n and Redsn0w do. This jailbreak tool has been neither confirmed by Geohot nor from the DevTeam. Many users think this is fake. We’ll see.

Here’s a video with Gull1hack in action:

Read the rest of this entry »

iH8sn0w released a new version of Sn0wbreeze, the Windows tool that allows to jailbreak the newest firmware 3.1.3. This is a small update that addresses several problems with YouTube.

You can download the new version of sn0wbreeze from here.

We still recommend to use DevTeam utilities – redsn0w (Windows and MAC OS) and pwnagetool (MAC OS only).

The iPhone Dev-Team has released PwnageTool 3.1.5 for Mac OS X. It allows iPhone and iPod Touch users to safely upgrade to firmware 3.1.3. With PwnageTool you can preserve jailbreak and ultrasn0w unlock. But if you’re using the blacksn0w unlock with baseband 05.11.07 you will need to stay at firmware 3.1.2.

PwnageTool 3.1.5 creates a custom 3.1.3 IPSW for the following devices:

• iPhone 2G
• iPhone 3G
• iPhone 3GS with early bootrom
• iPod touch 1G
• iPod touch 2G with early bootrom

Warning! Don’t try to use this tool if you have  iPhone 3GS with firmware 3.1.3 – it just won’t work. If you have iPod Touch 1G, iPhone 2G or factory unlocked iPhone 3G , try to use redsn0w – is would be much easier.

You can download PwnageTool 3.1.5. here.

H8sn0w has just released the new version of Sn0wbreeze 1.4. Sn0wbreeze is a jailbreak utility with functionality similar to PwnageTool. The new version supports firmware 3.1.3 jailbreak for the following devices:

• iPhone 2G
• iPhone 3G
• iPhone 3GS – old bootrom
• iPod Touch 1G
• iPod Touch 2G – non MC

Sn0wbreeze is a Windows application, so Mac users have to wait for the upcoming release of PwnageTool by the DevTeam. Alternatively, both Mac and Windows users can use Redsn0w to run jailbreak (no custom firmware though).

You can download the new version of sn0wbreeze here.

MuscleNerd continues to argue that we should not use sn0wbreeze. Especially users who have unlocked their iPhone with blacksn0w utility:

DevTeam released redsn0w 0.9.4. The updated utility is able to jailbreak the newest firmware 3.1.3.

Here is the list of supported devices:

• iPhone 2G
• iPhone 3G (only unlocked ones)
• iPod Touch 1G
• iPod Touch 2G (old versions,  serial number does NOT start with “MC”)

There is no unlock for firmware 3.1.3, so be careful. Redsn0w 0.9.4 doesn’t support iPhone 3GS, iPod Touch 3G and new versions of iPod Touch 2G.

You can download redsn0w 0.9.4 here.

Apple has just released new firmware 3.1.3 (7E18) for iPhone 3GS, iPhone 3G, iPhone 2G, iPod touch, iPod touch 2G and iPod touch 3G.

The update includes:

• Improves accuracy of reported battery level on iPhone 3GS
• Resolves issue where third-party apps would not launch in some instances
• Fixes bug that may cause an app to crash when using the Japanese Kana keyboard
• Other security updates (more info)

So this is a minor update, which fixing only the accuracy of the 3GS battery meter and the stability of some third-party app launches. This update is avaliable via iTunes.

New firmware 3.1.3 also introduces a new version of the baseband, the 05.12.01. So if you need unlock do not update! DevTeam also warns us:

If you care about your jailbreak and unlock, don’t update your device – 3G and 3G(S) owners should pay particular attention to this warning.
PwnageTool and redsn0w are not yet compatible with 3.1.3

Experimenters show that the latest version of redsn0w 0.9.2 is able to jailbreak iPhone 2G, iPhone 3G and iPod touch 1G. Just point it at the 3.1.2 IPSW (download here) after doing update or restore to firmware 3.1.3. Sounds like DevTeam will release an updated version of redsn0w that will handle firmware 3.1.3 officially. They say iPod touch 2G with firmware 3.1.3 is also jailbreakable.

Users report that unlock software, blacksn0w and ultrasn0w, doesn;t work with the new baseband.

Redsn0w is a cross-platform jailbreaking tool for iPhone and iPod Touch. New version redsn0w 0.9.2 supports the latest firmware 3.1.2.

redsn0w 0.9.2 supports:

• All iPhones and iPod touches
• Windows and Mac OSX (x86)
• Apple firmwares 3.0 and 3.1.2

We expect to see Linux version quite soon.

If you need a carrier unlock, redsn0w will handle iPhone 2G by itself (by installing the BootNeuter utility). For the iPhone 3G and iPhone 3GS use Cydia after you’re jailbroken to install ultrasn0w (baseband 04.26) or blacksn0w (baseband 05.11).

If you have a late-model iPhone 3GS, or if you have an iPod touch 2G whose serial number begins with “MC” (newer than week 40 of last year), or any iPod touch 3G, you can use redsn0w to jailbreak but you are currently restricted to “tethered” rebooting. That means you need to connect your device to a computer each time you boot it – so just try no to reboot.

You can download the latest version of redsn0w here.

Redsn0w is a cross-platform jailbreaking, unlocking, and customizing tool for iPhone and iPod Touch. New version redsn0w 0.9b3 supports the latest firmware 3.1.2. The most recent release before this one was redsn0w 0.8, which targeted Apple firmware 3.0/3.0.1.

redsn0w 0.9 beta3 supports:

• All iPhones and iPod touches except the iPod touch 3G
• Windows and Mac OSX (x86)
• Apple firmwares 3.0-3.1.2

When it’s out of beta, it will support the iPod touch 3G, PPC OSX, and Linux.

If you need a carrier unlock, redsn0w will handle iPhone 2G by itself (by installing the BootNeuter utility). For the iPhone 3G and iPhone 3GS use Cydia after you’re jailbroken to install ultrasn0w (baseband 04.26) or blacksn0w (baseband 05.11).

If you have a late-model iPhone 3GS, or if you have an iPod touch 2G whose serial number begins with “MC” (newer than week 40 of last year), you can use redsn0w to jailbreak but you are currently restricted to “tethered” rebooting. That means you need to connect your device to a computer each time you boot it – so just try no to reboot.

You can download redsn0w 0.9b3 here.

iH8Sn0w has released a beta of Sn0wbreeze a software utility which jailbreaks the iPod Touch 1G, 2G and iPhone 2G, 3G, and 3GS (old bootrom & non MC). The software runs on Windows XP, Vista, 7 (32 or 64 bit). Sn0wbreeze is similar to PwnageTool for Mac. It will allow you to create custom ipsws which can be built to include Cydia applications and personalized boot logos.

At this time BlackRa1n is still recommended for Windows users with firmware 3.1.2 and RedSn0w for earlier firmwares.

In addition to announcing a new version of Redsn0w, MuscleNerd has announced a PwnageTool port to Windows and Linux:

When asked about PwnageTool, MuscleNerd said via twitter “they can compile now for wxwidgets for redsn0w 0.9, so pwnagetool port can be based on this”, “and so that means, pwnagetool port for windows and linux. For OSX it’s all on @wizdaz of course ”

PwnageTool lets you build custom ipsw files which can include personalized boot logos as well as automatic installation of applications. There is also project called Sn0wBreeze, a port of PwnageTool to Windows. However a port from DevTeam is of course more preferrable.

The latest version of PwnageTool 3.14 can be downloaded here.

MuscleNerd, the member of DevTeam, started working on a new version of redsn0w. The update will add support of the latest firmware 3.1.2:

Redsn0w is an easy to use, multi-platform, multi-device jailbreaking tool for the iPhone 2G, iPhone 3G, iPhone 3GS (old iBoot) and iPod touch (first and second generation). It is available for Linux, Mac OS X and Windows. You can download redsn0w utility here.

DevTeam released PwnageTool 3.1. This utility will allow users of iPhone 2G, iPhone 3G, iPod Touch to run jailbreaked firmware 3.1. We still recommend staying on firmware 3.0/3.0.1 for as long as possible. The 3.1 firmware is not worth it. But if you really want 3.1. Here are the details:

1. If you are using a 3G iPhone with ultrasn0w and rely on ultrasn0w to obtain cellular service, then you should only upgrade to 3.1 with a PwnageTool created .ipsw. Never update using Apple’s unmodified firmware. Stay away from Apple’s direct updates.
2. This version of PwnageTool WILL NOT work for the iPhone 3GS and iPod Touch 2G/3G.
3. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.
4. It works only with Mac OS X.
5. Future releases of PwnageTool and RedSn0w will be soon with more functionality.

Here is per device info:

iPhone 3G (unlocked): This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.1 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.

iPhone 3G (locked): You need to preserve 3.0 baseband. Create a custom firmware.

iPhone 2G (1st Generation): Use PwnageTool to do the magic and then restore with iTunes using your newly created .ipsw, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.

iPod touch 1G (Original iPod Touch): Use PwnageTool to create a firmware image and restore with that .ipsw using iTunes.

iPod touch 2G: Sorry, no support at this time within PwnageTool, use Redsn0w for an earlier (pre 3.1) firmware release instead.

iPod touch 3G (New iPod Touch): Sorry, no support at this time within PwnageTool.

You can download PwnageTool 3.1 in our utilities page.

This information is for those who are worried about not being able to run the iPhone Jailbreak with the new operating system Snow Leopard. Dev Team said that RedSn0w and PwnageTool works perfectly.

Looks like Apple didn’t create any anti-jailbreak system. Good news.

Good news is that you can still use redsn0w 0.8 to jailbreak firmware 3.0.1. Here’s the step-by-step plan:

1. Download both firmware 3.0 and firmware 3.0.1 (link).
2. Download redsn0w 0.8 (link).
3. Update or restore to official 3.0.1 in iTunes.
4. Run redsn0w.
5. When redsn0w asks you to identify the IPSW used, point it at the 3.0 IPSW instead of the 3.0.1 one.
6. Follow the instructions.
7. After the jailbreak, reinstall ultrasn0w 0.9 if you need the unlock.

Now everyone will know that the DevTeam and GeoHot are no longer in good terms and in fact shortly after the release of Redsn0w 0.8, the tool to run the jailbreak of Firmawre 3.0, there were many discussions on Twitter between GeoHot and copumpkin, one of the DevTeam members.

GeoHot  complained that redsn0w uses the same “hole” and the same exploit to run the iPhone 3GS Jailbreak, copumpkin said that the flaw was the same but the exploit was completely different and created entirely by them. Not trusting, GeoHot asked repeatedly Hash codes (the identity) for the files needed to run the exploit and said that it had not been a good idea to release two programs that use the same “hole” (stealing?).

GeoHot also said, that redsn0w has problems (which is true, some users have reported problems) and so he plans to release a new better version of Purplera1n. It will probably will also unlock the iPhone.