News tagged ‘iPhone 2G’

Redsn0w is a cross-platform jailbreaking, unlocking, and customizing tool for iPhone and iPod Touch. New version redsn0w 0.9b3 supports the latest firmware 3.1.2. The most recent release before this one was redsn0w 0.8, which targeted Apple firmware 3.0/3.0.1.

redsn0w 0.9 beta3 supports:

• All iPhones and iPod touches except the iPod touch 3G
• Windows and Mac OSX (x86)
• Apple firmwares 3.0-3.1.2

When it's out of beta, it will support the iPod touch 3G, PPC OSX, and Linux.

If you need a carrier unlock, redsn0w will handle iPhone 2G by itself (by installing the BootNeuter utility). For the iPhone 3G and iPhone 3GS use Cydia after you're jailbroken to install ultrasn0w (baseband 04.26) or blacksn0w (baseband 05.11).

If you have a late-model iPhone 3GS, or if you have an iPod touch 2G whose serial number begins with “MC” (newer than week 40 of last year), you can use redsn0w to jailbreak but you are currently restricted to “tethered” rebooting. That means you need to connect your device to a computer each time you boot it - so just try no to reboot.

You can download redsn0w 0.9b3 here.

iH8Sn0w has released a beta of Sn0wbreeze a software utility which jailbreaks the iPod Touch 1G, 2G and iPhone 2G, 3G, and 3GS (old bootrom & non MC). The software runs on Windows XP, Vista, 7 (32 or 64 bit). Sn0wbreeze is similar to PwnageTool for Mac. It will allow you to create custom ipsws which can be built to include Cydia applications and personalized boot logos.

At this time BlackRa1n is still recommended for Windows users with firmware 3.1.2 and RedSn0w for earlier firmwares.

MuscleNerd, the member of DevTeam, started working on a new version of redsn0w. The update will add support of the latest firmware 3.1.2:

Redsn0w is an easy to use, multi-platform, multi-device jailbreaking tool for the iPhone 2G, iPhone 3G, iPhone 3GS (old iBoot) and iPod touch (first and second generation). It is available for Linux, Mac OS X and Windows. You can download redsn0w utility here.

Apple has approved iVideoCamera, an application which lets you record video on any iPhone including the iPhone 2G and iPhone 3G. Now you don't need a 3GS to record and share videos with your friends and family. Works with firmware 3.1 OS installed and includes:

Ability to save to your camera roll or "Photos" and share via:

• FaceBook
• YouTube
• Vimeo
• Twitter and more coming soon

Limitations:

• The iPhone can only capture about 3 frames per second
• Videos are limited to about 1 minute in length
• Resolution is low: 160x213

You can purchase iVideoCamera in App Store for $0.99 (link).

This is a great step forward, because Apple did not allow such apps to be in Appstore before. The quality of the recorded video is quite low, however it might be improved in the future. Could the acceptance of iVideoCamera open the door for Cycorder, popular video recording app that can be installed via Cydia?

TomTom navigation application updated to version 1.2. Added features include updates to maps and IQ Routes, advanced lane guidance, text-to-speech, integrated iPod player support and support for the iPod Touch and first-generation iPhone 2G.

To use the app on iPod Touch and iPhone 2G, TomTom's car kit is required. This is due to the fact that both devices lack an integrated GPS receiver. TomTom's car kit is a cradle which contains a GPS module, integrated speaker, charger, and line out. It is not required when the TomTom app is paired with the iPhone 3G and 3GS. The cost for the kit without the app is $119.95.

Full list of what's new in 1.2:

• Improved search and route summary screens
• Updated map from v8.30 to v8.35
• Updated points of interest database
• Updated IQ Routes database with millions of new measurements
• Added Advanced Lane Guidance in both portrait and landscape mode
• Added Text-to-speech in English US, English UK, English Australia, French Canada, Spanish Latin America
• Added Help Me! emergency menu
• Added iPod player support
• Added support for original iPhone and iPod touch (all models)

The TomTom app is available in App Store for $49.99-$139.99 (link). Price depends on the map coverage. The highest price is for TomTom Western Europe. US & Canada costs $99.99. The cheapest version is for Hong-Kong - just $49.99.

DevTeam just released PwnageTool 3.1.4. It allows users to jailbreak firmware 3.1.2 on iPhone 2G/3G/3GS and iPod Touch 1G/2G. It also supports OTB iPhone 3GS with firmware 3.1.x. We remind you that if you need unlock, do not update on regular 3.1.x firmware, use Pwnagetool to create custom firmware to preserve old baseband.

Here is a quick howto:

• Factory Unlocked iPhone 3G and iPhone 3GS: You do not need unlock, just use PwnageTool to create an ipsw and then use this to update and jailbreak your phone.
• iPhone 3G and iPhone 3GS: if you need unlock, use PwnageTool to create a custom firmware with an old baseband. Then update using created custom firmware and install ultrasw0w via Cydia to unlock.
• iPhone 2G: Use PwnageTool to do the magic and then restore with iTunes using your newly created .ipsw.The baseband will be unlocked, the phone jailbroken.
• iPod Touch 1G: Use PwnageTool to create a firmware image and restore with that .ipsw using iTunes.
  
• iPod Touch 2G: You must already be jailbroken in order to use PwnageTool. If so, create a firmware image and restore with that .ipsw using iTunes.
• iPod Touch 3G: No support yet.

You can download PwnageTool 3.1.4 here.

There is only a MAC version of PwnageTool. DevTeam doesn't plan to create Windows version.

MuscleNerd, a member of the Dev-Team, has announced via twitter the release of the new version of PwnageTool.

The software will be able to create a custom firmware 3.1.2 to jailbreak and unlock iPhone 2G, iPhone 3G, iPhone 3GS, iPod Touch and iPod Touch 2G. As stated everything would be ready soon and the tests performed were positive.

The DevTeam has just released Pwnage Tool 3.1-3, the new version of the tool for Mac OS that lets you run the jailbreak on iPhones and iPod Touch with firmware 3.1. The new version adds limited support for iPhone 3GS and iPod Touch 2G. It still works with iPhone 2G (EDGE), iPhone 3G and iPod Touch 1G.

The iPhone 3GS is now supported in PwnageTool 3.1.3, assuming the phone was pwned at 3.0 or 3.0.1 - PwnageTool does not support the 3GS out of the box. If your iPhone 3GS has 3.1 preinstalled and is not Pwned then there is no tested jailbreak solution at the moment.

The iPod 2G is now supported in PwnageTool 3.1.3, assuming the iPod 2G was pwned at 3.0 or 3.0.1 - PwnageTool does not support the iPod 2G with 3.1 software out of the box.

You can download in Pwnage Tool 3.1-3 here.

MacWorld performed several tests between all the Apple devices: iPhone 2G, iPhone 3G, iPhone 3GS, iPod Touch, iPod Touch 2G, iPod Touch 3G. Here are the results, all in one table:

Results are in seconds. Best results in bold. All devices were tested running iPhone OS 3.1. Peggle and Star Defense were app launch times to end of initial load screen. PCalc was launch time to calculator ready. Sunspider was the time to run the WebKit Sunspider JavaScript benchmark. Page load test was amount of time it took to load nytimes.com.

via macworld

DevTeam released PwnageTool 3.1. This utility will allow users of iPhone 2G, iPhone 3G, iPod Touch to run jailbreaked firmware 3.1. We still recommend staying on firmware 3.0/3.0.1 for as long as possible. The 3.1 firmware is not worth it. But if you really want 3.1. Here are the details:

1. If you are using a 3G iPhone with ultrasn0w and rely on ultrasn0w to obtain cellular service, then you should only upgrade to 3.1 with a PwnageTool created .ipsw. Never update using Apple's unmodified firmware. Stay away from Apple’s direct updates.
2. This version of PwnageTool WILL NOT work for the iPhone 3GS and iPod Touch 2G/3G.
3. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.
4. It works only with Mac OS X.
5. Future releases of PwnageTool and RedSn0w will be soon with more functionality.

Here is per device info:

iPhone 3G (unlocked): This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.1 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.

iPhone 3G (locked): You need to preserve 3.0 baseband. Create a custom firmware.

iPhone 2G (1st Generation): Use PwnageTool to do the magic and then restore with iTunes using your newly created .ipsw, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.

iPod touch 1G (Original iPod Touch): Use PwnageTool to create a firmware image and restore with that .ipsw using iTunes.

iPod touch 2G: Sorry, no support at this time within PwnageTool, use Redsn0w for an earlier (pre 3.1) firmware release instead.

iPod touch 3G (New iPod Touch): Sorry, no support at this time within PwnageTool.

You can download PwnageTool 3.1 in our utilities page.

Apple released new SDK and new firmware and 3.1 beta 2. Unless you have a developer account with Apple, don't plugging your iPhone into iTunes, you're not going to have access to it. However here is an unofficial changelist:

• Minor release focused more to fix the bugs.
• New APIs for video and images. It appears that there will be many applications in AppStore, suitable to apply effects on a video or create animated slideshow.
• Xcode bug-fixes.
• More items have been localized, such as "In Play", "Request access WiFi".
• Developers will be able to use WiFi for debuging, etc.
• Baseband is now version 05:10:01. This means that all those who use unlock - do not update yet.
• The iPhone is heated much less.
• Old method to turn tethering on  does not work anymore.

UPDATE: Here are direct links to download firmware 3.1 b2:

Read the rest of this entry »

Many users are waiting for iPhone navigation software from TomTom. But it looks like TomTom will create a complete  solution with a hardware part. They plan to create TomTom GPS Kit that will have additional GPS (more accurate), docking station, charger and probably a loudspeaker.

The devices that will support this kit are iPhone 3GS, iPhone 3G and even iPod Touch and iPhone 2G.

Worms game is now avaliable in AppStore for $4.99 (iTunes link). It is so popular and it is really great. Here are couple screenshots:

Unfortunately to iPhone 2G/3G users it run really slow on therse devices.Here are couple reviews:

• The game is SLOW. Lag time at every action, even in menus.
• Really bad framerate.
• I was expecting this game sience laste year when rumors came up about worms. Now i’m so very disapointed! IT’s very SLOW!

However iPhone 3GS users are happy:

• Game is plenty fast on my 3GS!
• First game that require a 3GS.

Here's a video demo:

Read the rest of this entry »

Great news for all iPhone 3GS users. DevTeam updated ultrasn0w, software that unlocks iPhone with firmware 3.0. Now it supports iPhone 3GS!

Avaliable in Cydia, repo: repo666.ultrasn0w.com

Here are quick instructions:

1. Ensure you have firmware 3.0
2. Jailbreak your iPhone using redsn0w (this will also install Cydia)
3. Run Cydia
4. Please add the repo repo666.ultrasn0w.com to Cydia. That last “o” is actually the number zero “0”! If you use the letter “o” you’ll get an error.
5. Search for ‘ultrasn0w’ in cydia or icy and install ultrasn0w
6. Reboot your iPhone 3G
7. T-Mobile USA users should disable 3G before using ultrasn0w
8. Enjoy
9. If you have any problems reset your network settings (it helped many users): Settings->General->Reset->Reset Network Settings

Redsn0w, jailbreak tool from DevTeam, is updated to version 0.8. This is for firmware 3.0 and now it supports:

• iPhone 2G - jailbreak and unlock
• iPhone 3G - jailbreak, use ultrasn0w for unlock
• iPod Touch - jailbreak
• iPod Touch 2G - jailbreak
• iPod Touch 3GS - jailbreak, use ultrasn0w (version 0.8 and higher) for unlock

You should use it instead of purplera1n tool to jailbreak and activate iPhones and iPods.

Download here.