News tagged ‘iPod Touch 2G’

The DevTeam has just released Pwnage Tool 3.1-3, the new version of the tool for Mac OS that lets you run the jailbreak on iPhones and iPod Touch with firmware 3.1. The new version adds limited support for iPhone 3GS and iPod Touch 2G. It still works with iPhone 2G (EDGE), iPhone 3G and iPod Touch 1G.

The iPhone 3GS is now supported in PwnageTool 3.1.3, assuming the phone was pwned at 3.0 or 3.0.1 - PwnageTool does not support the 3GS out of the box. If your iPhone 3GS has 3.1 preinstalled and is not Pwned then there is no tested jailbreak solution at the moment.

The iPod 2G is now supported in PwnageTool 3.1.3, assuming the iPod 2G was pwned at 3.0 or 3.0.1 - PwnageTool does not support the iPod 2G with 3.1 software out of the box.

You can download in Pwnage Tool 3.1-3 here.

iH8sn0w is working on a new project called sn0wbreeze. This will be a port of PwnageTool for Windows. Here are couple quotes from twitter:

iH8sn0w The new project that we are working on is sn0wbreeze. It is basically PwnageTool for Windows. Our ETA is October 12.
iH8sn0w Sn0wBreeze will Support iPod Touch 2G running 3.1 OTB!!! Not the 3G[S]!

With sn0wbreeze it will be possible to create custom firmware under Windows and use it for firmware 3.1 jailbreak.

UPDATE: Download it here.

MacWorld performed several tests between all the Apple devices: iPhone 2G, iPhone 3G, iPhone 3GS, iPod Touch, iPod Touch 2G, iPod Touch 3G. Here are the results, all in one table:

Results are in seconds. Best results in bold. All devices were tested running iPhone OS 3.1. Peggle and Star Defense were app launch times to end of initial load screen. PCalc was launch time to calculator ready. Sunspider was the time to run the WebKit Sunspider JavaScript benchmark. Page load test was amount of time it took to load nytimes.com.

via macworld

DevTeam released PwnageTool 3.1. This utility will allow users of iPhone 2G, iPhone 3G, iPod Touch to run jailbreaked firmware 3.1. We still recommend staying on firmware 3.0/3.0.1 for as long as possible. The 3.1 firmware is not worth it. But if you really want 3.1. Here are the details:

1. If you are using a 3G iPhone with ultrasn0w and rely on ultrasn0w to obtain cellular service, then you should only upgrade to 3.1 with a PwnageTool created .ipsw. Never update using Apple's unmodified firmware. Stay away from Apple’s direct updates.
2. This version of PwnageTool WILL NOT work for the iPhone 3GS and iPod Touch 2G/3G.
3. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.
4. It works only with Mac OS X.
5. Future releases of PwnageTool and RedSn0w will be soon with more functionality.

Here is per device info:

iPhone 3G (unlocked): This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.1 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.

iPhone 3G (locked): You need to preserve 3.0 baseband. Create a custom firmware.

iPhone 2G (1st Generation): Use PwnageTool to do the magic and then restore with iTunes using your newly created .ipsw, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.

iPod touch 1G (Original iPod Touch): Use PwnageTool to create a firmware image and restore with that .ipsw using iTunes.

iPod touch 2G: Sorry, no support at this time within PwnageTool, use Redsn0w for an earlier (pre 3.1) firmware release instead.

iPod touch 3G (New iPod Touch): Sorry, no support at this time within PwnageTool.

You can download PwnageTool 3.1 in our utilities page.

Rodrigo, a Brazilian developer is working on a project called roqyBluetooth. It enables an iPhone and iPod Touch 2G to communicate with an external GPS receiver.

The connection is established via Bluetooth, the application will be released soon, but only for jailbroken devices.

via ispazio

Apple released new SDK and new firmware and 3.1 beta 2. Unless you have a developer account with Apple, don't plugging your iPhone into iTunes, you're not going to have access to it. However here is an unofficial changelist:

• Minor release focused more to fix the bugs.
• New APIs for video and images. It appears that there will be many applications in AppStore, suitable to apply effects on a video or create animated slideshow.
• Xcode bug-fixes.
• More items have been localized, such as "In Play", "Request access WiFi".
• Developers will be able to use WiFi for debuging, etc.
• Baseband is now version 05:10:01. This means that all those who use unlock - do not update yet.
• The iPhone is heated much less.
• Old method to turn tethering on  does not work anymore.

UPDATE: Here are direct links to download firmware 3.1 b2:

Read the rest of this entry »

VolumeBooster is a tool that, by changing some system files, should increase the sound coming from the speaker of the iPhone / iPod Touch 2G by 20%.

The procedure for the installation is simple, run Cydia and find "Volume Boost", available in the repository ModMyi. It works thriugh Winterboard, after installation you need to apply the Mod. VolumeBooster is compatible with all firmware versions.

Note: Do not install on the iPhone 3GS, because the audio there is already set to 100%.

Brando has just opened its new sales of the Mini Microphone Capsule for iPhone. This is a small accessory, to be entered into the headphone jack, which allows you to record sounds 10 better than the internal microphone. As you can see in the image, the microphone is flexible and adjustable, improves the sound by 25 dB and also works on iPod Nano 4G and iPod Touch 2G. The accessory costs $14. Here is a link to the manufacturer.

Redsn0w, jailbreak tool from DevTeam, is updated to version 0.8. This is for firmware 3.0 and now it supports:

• iPhone 2G - jailbreak and unlock
• iPhone 3G - jailbreak, use ultrasn0w for unlock
• iPod Touch - jailbreak
• iPod Touch 2G - jailbreak
• iPod Touch 3GS - jailbreak, use ultrasn0w (version 0.8 and higher) for unlock

You should use it instead of purplera1n tool to jailbreak and activate iPhones and iPods.

Download here.

And after the various Key and provocations made by GeoHotz, the DevTeam has decided to write a new article on the official blog with good news for all owners of an iPhone 3GS! The DevTeam has verified that the exploit called 24Kpwn (used for the first time to unlock the iPod Touch 2G) is still valid and it works wonderfully for iPhone 3GS.

It seems the new version of bootrom used by Apple in 3GS dates back in August, a few months before the release of 24Kpwn, so there was no time to solve the problem.

In addition, the new daemon released by the team under the name of ultrasn0w (unlock for iPhone 3G) will work with iPhone 3GS.

New versions of redsn0w (jailbreak) and ultrasn0w (unlock) with iPhone 3GS support will be released soon.

Users from forum iPodTouchFans analyzed strings in firmware 3.0 and found traces of a new iPod model defined as "iPod3, 1". The current iPod Touch 2G is the "iPod2, 1". Apple typically releases a new iPod every year, precisely in September. In addition to 'iPod3, 1 were also found traces of a iPhone3, 1, "iFPGA" and "iProd0, 1" which still remain a mystery.

Among the various rumors there are:  new hardware and a camera in the next model of iPod Touch, video capture, etc. We shall see!

RedSn0w is an easy to use, multi-platform, multi-device jailbreaking and unlocking (iPhone 2G only) tool from DevTeam. It supports firmware 3.0 and iPhone 2G (original iPhone), the iPhone 3G (but not the 3GS) and also the iPod touch (first and second generation):

Read the rest of this entry »

DevTeam released PwnageTool for firmware 3.0. Here is the list of supported deviced:

• iPhone 2G - jailbreak and unlock
• iPhone 3G - only jailbreak, use only with official unlocked iPhones
• iPod Touch - jailbreak
• iPod Touch 2G - not supported, use redsn0w
• iPod Touch 3GS - not supported

If you are using a 3G iPhone with yellowsn0w and rely on yellowsn0w to obtain cellular service, then you should NOT use PwnageTool right now. Ultrasn0w is not included with this release and therefore your baseband will be locked and unable to use an operator other than the official one it was bought for. Ultrasn0w will be release via APT (cydia and icy) soon (update: Ultrasn0w released). If you have an original iPhone (1st generation) then 3.0 unlock works with this PwnageTool release.

Yellowsn0w in its current form will NOT work with the baseband version that is present in the 3.0 update, you will need Ultrasn0w, which will be released sometime soon, Ultrasn0w will work with all iPhone 3G models (but not 3GS), even ones that were previously unlockable, Ultrasn0w will be released via APT (this means you can get it via Cydia or Icy).

PwnageTool will NOT work for the iPhone 3GS. PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.

You can donwload PwnageTool 3.0 here.

iPhone OS 3.0 is now available. Update via iTunes (you need 8.2) or download here. Firmwares are avaliable for all devices: iPhone, iPhone 3G, iPhone 3GS, iPod Touch and iPod Touch 2G. Here is a link to official Apple site about this upgrade.

Do not upgrade if you want jailbreak and/or unlock. Just wait for DevTeam to release their software.

DevTeam has announced that iPod Touch 2G is finally jailbreaked.

The raw patch to the firmware that transforms the “tethered” jailbreak into an untethered one was released here but it’s not yet packaged up into the PwnageTool or QuickPwn flows. But other threads there are pulling together tutorials and other tips for those of you anxious to try this out now.  For the curious, the hole itself is explained here.