News tagged ‘IPS’

Digitimes has reported that Apple will be utilizing IGZO (indium gallium zinc oxide) flat panels instead of IPS (in-plane switching panels) in its "next-generation mobile display products" such as the iPad 3.

Starting with the new iPads, Apple will utilize IGZO panels from Sharp in order to upgrade the display resolution of the new tablets to full HD level, the sources indicated.

Though, such rumors aren’t new ones. We have already heard that Apple could use this technology in the next-generation iPad. A research note from Jefferies analyst Peter Misek back in November made very similar claims:

Also, we believe that Apple and Sharp together have a modified IGZO (indium, gallium, zinc) technology to achieve 330 dpi, which is sufficient for an HD display while not using IPS nor having to include dual-bar LED backlighting. In our view, this should lead to several design advantages, namely the device can be thinner, battery life should be longer, and the overall experience for users should be meaningfully improved.

In April, Sharp revealed its plans to commercialize new IGZO panels for mass production later this year. DisplayBlog recaps the advantages of this new technology:

The benefits of IGZO are plenty: lower cost of manufacturing, up to 30x higher electron mobility than a-Si (amorphous silicon), increased aperture ratio for improved light transmittance, higher resolution in terms of ppi, etc. IGZO would allow for significant cost reductions compared to LTPS (Low Temperature Poly-Silicon).

The new technology is said to allow Apple not to use a second light bar system that is presently used in the iPad and to avoid making the iPad 3 thicker than the current iPad.

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to perform untethered jailbreak of your iPad on iOS 5.0.1 firmware using RedSn0w 0.9.10 for Windows.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Read the rest of this entry »

Digitimes now claims that it has obtained new portion of information on the rumored Apple’s television. The main role in manufacturing and assembling of the new TVs is expected to be played by Foxconn, Apple's primary iOS device manufacturing partner.  The company is likely to win the contract for assembly of the television set products.

Following sources' claims that Samsung Electronics and Sharp will manufacture chips and displays, respectively, for the so-called Apple "iTV," others have suggested that Taiwan Semiconductor Manufacturing Company (TSMC), Advanced Semiconductor Engineering (ASE) and Siliconware Precision Industries (SPIL) have the potential to win orders for Apple's smart TV.

Foxconn Electronics (Hon Hai Precision Industry) likely will obtain assembly orders for the Apple smart TV, according to industry sources.

We have already reported that Apple is going to finalize Apple’s TV design by the end of the second quarter and launch the television sets by the end of the year. Moreover, the analyst Shaw Wu at Sterne Agee has suggested that Apple may be interested in disrupting the television industry on the content side by launching its own television services which, obviously, will be connected with Siri.

"This is obviously much more complicated (than current offerings) from a licensing standpoint," Wu wrote in a note to investors on Wednesday. "And in our view, would change the game for television and give AAPL a big leg-up against the competition."

Hardware and technology are not the issues holding back Apple from releasing a television set, he said. Instead, Apple must negotiate unique content deals that will allow the company to differentiate its product from other televisions on the market.

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to perform untethered jailbreak of your iPod Touch 3G on iOS 5.0.1 firmware using RedSn0w 0.9.10 for Windows.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Read the rest of this entry »

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to perform untethered jailbreak of your iPod Touch 4G on iOS 5.0.1 firmware using RedSn0w 0.9.10 for Windows.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Read the rest of this entry »

Apple is expected to build its own chips like in the iPhone and iPad for its anticipated television set, instead of utilizing third parties chips from a company such as Intel.

Taiwan Semiconductor Manufacturing Company (TSMC), Advanced Semiconductor Engineering and Siliconware Precision Industries are three companies expected by DigiTimes to bid on orders with Apple. The companies could build custom ARM-based chips to power an Apple television, much like the A4 CPU, first released in the iPad in 2010, is found in the current Apple TV set-top box.

Earlier this year we reported that Apple signed the agreement on the production of next-generation "A6" and "A7" processors for the iPhone and iPad with TSMC and would utilize its 28nm and 20nm process technologies. It is possible that Apple television set will use the same iPhone and iPad’s chips. The Apple TV is also expected to be assembled by Foxconn Electronics, which is the manufacture of most of Apple’s devices.

Apple will have finalized the hardware standards for its television set by the end of the second quarter of 2012, only after that, the company will begin placing orders for its customized chips. Apple already used such approach to build its iPad and iPhone lineups.

Early this month the rumors suggested that Intel’s next-generation Ivy Bridge processors would launch in May. Theses mobile processors are expected to be used in Mac mini, MacBook Pro and MacBook Air lines.

Now DigiTimes reports that new Ivy Bridge processors may debut in early April, with both desktop and mobile processors launching around the same time.

Read the rest of this entry »

UPDATE: Apple released iOS 5.1 that is only tethered jailbreakable with redsn0w. Apple has stopped signing iOS 5.0.1, so you can NOT restore to 5.0.1 any more (both original and custom), unless you have saved your SHSH keys for 5.0.1. If you are on 5.0.1 you can jailbreak with redsn0w.

This is step-by-step instructions on how to perform untethered jailbreak of your iPhone 4 on iOS 5.0.1 firmware using RedSn0w 0.9.10 for Windows.

Untethered jailbreak means that each time you restart your device you will NOT need to connect it to a computer and run utilities.

Read the rest of this entry »

Digitimes reports citing its industry sources from the Asian supply chain that Apple is going to launch HDTV in 37-inch and 32-inch variants in summer 2012.

Read the rest of this entry »

Untethered jailbreak is available for iOS 5.0.1 firmware on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G.

1. If you're already on iOS 5.0.1 with a tethered jailbreak, you have two even choices:

1. Run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia”)
2. Install the Cydia package prepared by the chronic devteam. It is called Corona 5.0.1 Untether. (tutorial)

2. If you are not on 5.0.1 yet, update now! If you unlock via ultrasn0w or gevey, make sure you update to 5.0.1 via a custom IPSW! See our guides for sn0wbreeze here. Once you're at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.

You can download RedSn0w 0.9.10b1 here.

Our step-by-step tutorials for untethered jailbreak using redsn0w 0.9.10:

• iPhone 4
• iPhone 3GS
• iPod Touch 4G
• iPod Touch 3G
• iPad 1

The iPhone Dev-Team has released UltraSn0w 1.25 which brings iOS 5.0.1 support to the unlock for older compartible basebands.

iPhone Dev Team's iPhone 4, 3G, and 3GS software unlock, now with added PwnApple. Compatible with iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and 06.15.00! Thanks to @sherif_hashim and @Oranav for contributing baseband crashes

UltraSn0w 1.2.5 is now available in Cydia.

If you have one of the supported basebands and wish to update to iOS 5.0.1 you will need to do so with a custom ipsw that doesn't update your baseband.

iPhone Dev-Team released RedSn0w 0.9.9b9 with full iOS 5.0.1 support (no need to point to iOS 5.0 any more). New version also features support for SHSH and APTickets:

• native support for 5.0.1 (no need to point redsn0w at 5.0 IPSW or use command-line args).  Support automatically extends to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
• iBooks fixed in 5.0 and 5.0.1.  This is a targeted fix that doesn’t remove entire sandbox mechanism.  5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
• 3GS old-bootrom owners can now create custom IPSWs without blobs
• ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
• support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”).  Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
• allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates.  (Update: please wait for 0.9.9b9b for this!)
• accommodates APTickets in 5.x (until next Apple countermove).  APTickets are crypto-verified before submitting to Cydia, just like the main blobs.  Cydia server support for sending back the APTickets is upcoming.  For now, use stitched IPSWs for 5.x.  Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
• Support added for stitching 4.x blobs to iPad2-GSM IPSWs.  Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
• top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest.  Uses DNS TXT record to alleviate any concerns about snooping
• no 5.1 beta support at this time (major apps like Cydia are not yet compatible)
• @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
• Owners of newer 3GS iPhones must not flash the iPad baseband.  The iPad baseband will not work on 3GS iPhones built later than 2011 week 35.  You have a week 35 or later device if your serial # starts with xx135.

Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.

You can download RedSn0w 0.9.9b9b here.

UPDATE: redsn0w updated to redsn0w 0.9.9b9d.

Read the rest of this entry »

Chair Entertainment launched a sequel of its Infinity Blade in Apple Stores. The original version became the first iOS game running on the Unreal Engine and also the best-selling iOS game with 1,6 millions downloads just in four days after its release.

Read the rest of this entry »

Apple has released iOS 5.1 beta and a preview of Xcode 4.3 to developers.

The build of iOS 5.1 is 9B5117b and the build of Xcode 4.3 is 4D1002. There is no official changelog and no information on what was added or changed.

Developers can download the iOS 5.1 ipsw from here.

Rumors about Apple’s plans to implement high-resolution 2048x1536 Retina display to the next-generation iPad have been circulating for some time now. According to different sources, the new iPad 3 is required two light bars in order to manage the much higher resolution, so that it will be 0.7 mm thicker than the iPad 2.

Some analysts predict that Apple will continue using in-plane switching (IPS) technology for the new display. But Jeffries analyst Peter Misek together with Forbes suppose that Apple is not going to use IPS on the iPad 3, and seeks new ways and technology to produce the iPad 3 with a thinner and lower-power design.

Also, we believe that Apple and Sharp together have a modified IGZO (indium, gallium, zinc) technology to achieve 330 dpi, which is sufficient for an HD display while not using IPS nor having to include dual-bar LED backlighting. In our view, this should lead to several design advantages, namely the device can be thinner, battery life should be longer, and the overall experience for users should be meaningfully improved.