News tagged ‘ultrasn0w’

The iPhone Dev-Team has issued a notice stating that updating your iPhone to the iPad baseband for unlock could result in the loss of GPS functionality.

Unlockers have been reporting mixed results about GPS functionality at 06.15.00. Until we can track down what differentiates those who retain GPS vs. those who lose it, be conservative and assume you’ll lose GPS at 06.15.00. As we work on finding the cause (and possibly a fix), please report your personal findings in our comments section. (Update: early indications are that while 06.15.00 is capable of GPS, it will require some further hacks. But please still be conservative and assume you will lose GPS at 06.15, in case the hacks don’t work).

Hackers are currently working to fix this.

As usual we remind all users - if you don't absolutely need to update your baseband, don't do it.

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update to 4.2.1, use PwnageTool to create custom firmware!

UPDATE 3: If you have new bootrom and ios 4.1, do not update to 4.2.1 - you will loose untethered jailbreak.

UPDATE 4: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

This is step-by-step instructions on how to jailbreak and unlock your iPhone 3GS on iOS 4.2.1 firmware using RedSn0w 0.9.6b5 for Windows.

For iPhone 3G use this tutorial.

If you have an iPhone 3GS with the new bootrom you will only be able to perform a tethered jailbreak at this time. This means you will need Redsn0w's assistance to boot into your jailbroken device.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

IMPORTANT FOR UNLOCKERS

During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

Read the rest of this entry »

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update to 4.2.1, use PwnageTool to create custom firmware!

UPDATE 3: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

This is step-by-step instructions on how to jailbreak and unlock your iPhone 3G on iOS 4.2.1 firmware using RedSn0w 0.9.6b5 for Windows.

For iPhone 3GS use this tutorial.

IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

Read the rest of this entry »

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update! Use PwnageTool.

UPDATE 3: If you have 4.1 and 3gs with new bootrom, do not update to 4.2.1, create custom 4.1 firmware using pwnagetool.

UPDATE 4: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

These are instructions on how to jailbreak and unlock your iPhone 3GS on iOS 4.1 using PwnageTool 4.1.3 for Mac OS X. This tutorial will explain how to upgrade your baseband if needed for an unlock.

For iPhone 3G use this tutorial.

There is no unthethered jailbreak for new iPhone 3GS bootroms and iOS 4.2.1 yet, so you should stay at iOS 4.1.

Important: iPhone3GS users with old bootroms who want to go to 4.2.1 and unlock should not use this PwnageTool! Update to stock 4.2.1 first, then use new redsn0w to update your baseband.

Step One
Make a folder called "Pwnage" on the desktop. Download a couple of things:

Read the rest of this entry »

UPDATE: Обязательно (!) думайте перед тем, как что-нибудь сделать. Читайте внимательно и еще раз думайте. Не понятно - читайте снова. Спрашивайте до, а не после.

UPDATE 2: Если у вас 05.13 baseband и ниже - она ломается старыми способами, не надо обновляться до 05.14, 05.15 и 06.15. Хочется перейти на 4.1/4.2 - тогда делайте кастом прошивку с помощью pwnagetool.

UPDATE 3: Обновив версию baseband до iPad для анлока iPhone можно потерять GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Данное пошаговое руководство позволит вам сделать джейлбрейк и анлок iPhone 3G на iOS 4.2.1 с помощью PwnageTool 4.1.3 под Mac OS X. Здесь также будут даны инструкции по обновлению baseband, если это необходимо для анлока (отвязки от оператора сотовой связи).

Для iPhone 3GS используйте руководство для iPhone 3GS.

Для пользователей Windows есть соответствующее пошаговое руководство.

Шаг 1
Создайте папку "Pwnage" на десктопе. Скачайте в нее все необходимое:

Read the rest of this entry »

This is the tweet from MuscleNerd posted a minute ago. So it is just minutes to wait for new unlock utility ultrasn0w.

UPDATE: New ultrasn0w released! New PwnageTool 4.1.3 released. Read carefully this post from DevTeam first, then reread again!

UPDATE 2: new ultrasn0w 1.2 supports the following basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

UPDATE 3: Step-by-step Tutorial: How to Jailbreak and Unlock

Read the rest of this entry »

MuscleNerd has recently announced via tweeter that ultrasn0w unlock for iPhone is now fully working on iOS 4.2.1

Finally got ultrasn0w working fully on 4.2.1. Apple inadvertently(!) broke ultrasn0w via aggressive compiler optimization

MuscleNerd previously announced that the ultrasn0w unlock should be available by Sunday for the iPhone 3G and iPhone 3GS. The unlock for the iPhone 4 will take much more time.

UPDATE: this is not a reason for update to iOS 4.2.1, wait for utilities.

Read the rest of this entry »

DevTeam hacker MuscleNerd tweeted that they after releasing redsn0w jailbreak for 4.2 the team can start working on iPhone unlock. Users can expect the unlock for the iPhone 3G and iPhone 3GS this week. The iPhone 4 unlock will take more time and no concrete info is available about that yet.

The ultrasn0w unlock will be released for iOS 4.1 firmware. So is you need unlock, do not update to iOS 4.2.1.

DevTeam worked hard for the last several hours and released jailbreak tool for iOS 4.2.1. It is redsn0w 0.9.6 b4.

As usual we remind all ultrasn0w unlockers please stay away from this official firmware. Wait for the ability to create custom 4.2.1 IPSWs that don’t update your baseband!

New redsn0w 0.9.6 b4 uses limera1n exploit and will successfully jailbreak all devices. The only problem is that it is a tethered jailbreak, which means you will have to plug it to a computer and rerun redsn0w on every reboot. This so called tethered or semi-tethered jailbreak. This condition applies to iPhone 3GS (new bootrom), iPhone 4, iPad, iPod touch 2G (MC model), iPod touch 3G and iPod touch 4G. Hackers are working hard to create untethered jailbreak for these devices. To use future untethered jailbreak you need to save SHSH keys for iOS 4.1 using TinyUmbrella utility or directly in Cydia.

Old devices like iPhone 3GS (old bootrom), iPhone 3G and iPod touch 2G (non-MC model) can be jailbroken-untethered right now using this latest version of RedSn0w.

You can download RedSn0w 0.9.6 b4 here.

These are instructions on how to jailbreak your iPhone using PwnageTool 4.1.2 for Mac OS X. If you need unlock and you have not updated to iOS 4 you will be able to preserve baseband and unlock iPhone using ultrasn0w.

This guide will work for iPhone 4, iPhone 3GS, iPhone 3G, iPod Touch 3G, iPod Touch 4G, iPad and AppleTV. Just use the right firmware and select the right device (step four).

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Step One
Make a folder called "Pwnage" on the desktop. Now you need to download there PwnageTool 4.1.2 from here and iOS 4.1 firmware from here.

When downloading the IPSW file, it is best to download it with Firefox since Safari often auto extracts it!

Step Two
Double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder.

Read the rest of this entry »

The iPhone DevTeam has just released jailbreak utility PwnageTool 4.1 for Mac OS X.

PwnageTool allows you to restore to a custom IPSW file. The main advantage of PwnageTool is for unlockers. It gives the ability to keep current baseband and preserve ultrasn0w unlock. This is only for those, who have not updated to iOS 4.1 by themseleves.

You can also add whatever packages you want in the “Expert” mode of PwnageTool, if you wish to pre-install something from Cydia.

Here is a list of supported devices:

• iPhone4
• iPhone 3GS
• iPhone 3G
• iPad (firmware 3.2.2)
• AppleTV 2G
• iPod touch 4G
• iPod touch 3G

You can download PwnageTool 4.1 here.

UPDATE: PwnageTool 4.1.1 is now available

Here is a step-by-step Tutorial: how to jailbreak and unlock your iPhone using PwnageTool 4.1.1.

This is what MuscleNerd have seen while trying to make iPhone unlock for iOS 4.1 work. Quite strange and scary. While we can see that UltraSn0w 4.1 is not ready yet, this is good that the work is in progress.

MuscleNerd writes:

After plugging in my test T-Mobile SIM for ultrasn0w @4.1, I saw these come in: http://is.gd/g7OR0 .. scary!

These are instructions on how to jailbreak your iPhone 3GS (all bootroms) or iPhone 4 using Limera1n for Mac OS X. Limera1n supports iOS 4.0, iOS 4.0.1, iOS 4.0.2 and iOS 4.1. Use the same steps to jailbreak iPod Touch 4G and iPod Touch 3G and even iPad. You can find the Windows version of this tutorial here.

Remember: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Step 1
Open your browaer and navigate to www.limera1n.com and download LimeRa1n for Mac by clicking on the Mac logo.

Read the rest of this entry »

Today the Chronic Dev-Team released their jailbreak utility called Greenpois0n. There are currently two versions - for Windows and for Linux users. The team is working on a Mac version, so it will be released soon. Greenpois0n supports only firmware iOS 4.1, so use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1 or iOS 4.0.2.

Remember: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet.

Hackers used the bootrom exploit found by Geohot and used in limera1n.

Read the rest of this entry »

Hacker Sherif Hashim has discovered an exploit in iPhone's baseband which could bring an unlock for iOS 4.1 and iOS 4.2. Here are tweets from him:

@sherif_hashim: since nearly all my received tweets ask about both BB, I can report very early "initial" 1st step success on both sides, calmed down?

@sherif_hashim: @mrpauldurden a bit more sure than this, yeah

@mrpauldurden: @sherif_hashim very early first steps means.. you've found a crash that can potentially prove to be an expoitable vulnerability?

In the past Hashim found a baseband crash in iOS 4.0, his work brought us ultrasn0w 1.01, utility from DevTeam to unlock iPhone with iOS 4.0.
Another hacker Veeence tweets that the unlock won't be released till iOS 4.2. Apple plans to release 4.2 in November:

@veeence: A new exploitable baseband crash has been found. An unlock will very likely be released after iOS 4.2 and will unlock both BB's of 4.1 & 4.2

Read the rest of this entry »