News tagged ‘Tutorial’

DevTeam released PwnageTool 4.2 utility. It is able to create a custom IPSW that can perform an untethered jailbreak on iOS 4.2.1. As usual it can preserve baseband version for unlockers. Devteam used the same method that was implemented in greenpois0n.

PwnageTool supports all 4.2.1 devices other than iPod touch 2G:

• iPhone3G
• iPhone3GS
• iPhone4
• iPhone4-Verizon
• iPod touch 3G
• iPod touch 4G
• iPad
• AppleTV 2G

Jailbreak is even improved compared to GreenPois0n RC6:

Read the rest of this entry »

These are step-by-step instructions on how to jailbreak iOS 4.2.1 on iPhone 3GS, iPhone 4, iPad, iPod Touch 2G, iPod Touch 3G, iPod Touch 4G using Greenpois0n for Windows. Tutorial for Mac OS X users is available here. All the steps are the same for all devices, we will cover iPhone.

Greenpois0n has been updated to support the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.

Remember: Greenpois0n recommends a clean restore before continuing.

Unlockers: do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. Experienced users can also try update to iOS 4.2.1 without upgrading your baseband by using TinyUmbrella. Start TSS Server->Start iTunes->Plug in your iPhone->Restore 4.2.1->Error 1013->Put phone into DFU Mode->Launch Greenpois0n.

We are not authors of this app. We do not promise that everything will go well, use this tutorial at your own risk.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Step One
Open your web browser and download the latest Windows version of GreenPois0n from here.

Read the rest of this entry »

The Chronic Dev-Team has released Greenpois0n for Windows which brings an untethered jailbreak to iOS 4.2.1 devices. You can jailbreak iPhone 4, iPhone 3GS, iPod Touch 2G, iPod Touch 3G, iPod Touch 4G, iPad.

You can download the latest version of GreenPois0n from here.

Update: Step-By-Step tutorial

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

These are step-by-step instructions on how to jailbreak iOS 4.2.1 on iPhone 3GS, iPhone 4, iPad, iPod Touch 2G, iPod Touch 3G, iPod Touch 4G using Greenpois0n for Mac OS X. Tutorial for Windows users is available here. All the steps are the same for all devices, we will cover iPhone.

Greenpois0n has been updated to support the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.

Remember: Greenpois0n recommends a clean restore before continuing.

Unlockers: do not update to iOS 4.1 or iOS 4.2.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. Experienced users can also try update to iOS 4.2.1 without upgrading your baseband by using TinyUmbrella. Start TSS Server->Start iTunes->Plug in your iPhone->Restore 4.2.1->Error 1013->Put phone into DFU Mode->Launch Greenpois0n.

We are not authors of this app. We do not promise that everything will go well, use this tutorial at your own risk.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Step One
Open your web browser and download the latest Mac version of GreenPois0n from here.

Read the rest of this entry »

The Chronic Dev-Team has finally released the new version of Greenpois0n, which features a full untethered jailbreak for iOS 4.2.1. No SHSH blobs needed. The exploit used has already been patched in iOS 4.3, so it not work on future iOS 4.3.

You can jailbreak iPhone 4, iPhone 3GS, iPod Touch 2G, iPod Touch 3G, iPod Touch 4G, iPad. Unlike redsn0w 0.9.6 this is untethered, so there is no need to connect iOS device to a computer after restart.

There is only Mac OS X version available. Chronic Dev-Team will release Windows and probably Linux version soon.

Unlockers: do not update to stock iOS 4.2.1. You should keep your baseband version. Wait for new version of PwnageTool.

You can download GreenPois0n RC5 from here.

UPDATE: Step-by-step tutorial

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

We have already written about new Cydia version 1.0.3366-1 that was released recently. It is much faster and has many new other improvements.

The problem was that to install it users had to download deb package, install it manually in terminal, etc. It was hard. We have decided to make Cydia update easy, so we have added Cydia v1.0.3366-1 to our repository. To update Cydia just add our repository in Cydia: https://iphoneroot.com/repo/ and update.

To add repository run Cydia. Go to Manage -> Sources. Click Edit (top right corner), after that click Add (top left corner), type https://iphoneroot.com/repo/ and click Add Source button. Then click Return to Cydia and Done button. After that you can either click on iphoneroot.com select Cydia and install it or go to Changes and update it there.

Tutorial how to add iphoneroot repo with screenshots is available here.

The new version 1.0.3366-1 of Cydia  is ready.

Commenting on the release Saurik said:

some of my long term performance plans are 'hitting pay dirt', and Cydia is much faster than it was before; that said, it isn't done yet: there's one more thing that I think is going to make a huge difference that isn't even in there yet but should be for the final release.

This version of Cydia is included in the latest release of RedSn0w, and can also be downloaded as deb file from here. But if you're on an iPhone 4 or other already jailbroken device, you can still install it. There are 4 different ways to do that:

Read the rest of this entry »

Jailbreak utility RedSn0w 0.9.6 b5 is available for both Windows and Mac OS X. The process is the same on both operating systems. So you can use redsn0w tutorial for windows. There is only one major difference - download redsn0w for Mac OS here or here.

• iPhone 3G tutorial for jailbreak and unlock
• iPhone 3GS tutorial for jailbreak and unlock

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update to 4.2.1, use PwnageTool to create custom firmware!

UPDATE 3: If you have new bootrom and ios 4.1, do not update to 4.2.1 - you will loose untethered jailbreak.

UPDATE 4: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

This is step-by-step instructions on how to jailbreak and unlock your iPhone 3GS on iOS 4.2.1 firmware using RedSn0w 0.9.6b5 for Windows.

For iPhone 3G use this tutorial.

If you have an iPhone 3GS with the new bootrom you will only be able to perform a tethered jailbreak at this time. This means you will need Redsn0w's assistance to boot into your jailbroken device.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

IMPORTANT FOR UNLOCKERS

During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

Read the rest of this entry »

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update to 4.2.1, use PwnageTool to create custom firmware!

UPDATE 3: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

This is step-by-step instructions on how to jailbreak and unlock your iPhone 3G on iOS 4.2.1 firmware using RedSn0w 0.9.6b5 for Windows.

For iPhone 3GS use this tutorial.

IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

Read the rest of this entry »

UPDATE: Please think first, before you do something.

UPDATE 2: If you have 05.13 baseband or lower - do not update! Use PwnageTool.

UPDATE 3: If you have 4.1 and 3gs with new bootrom, do not update to 4.2.1, create custom 4.1 firmware using pwnagetool.

UPDATE 4: WARNING: updating to iPad baseband for iPhone unlock may disable your GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

These are instructions on how to jailbreak and unlock your iPhone 3GS on iOS 4.1 using PwnageTool 4.1.3 for Mac OS X. This tutorial will explain how to upgrade your baseband if needed for an unlock.

For iPhone 3G use this tutorial.

There is no unthethered jailbreak for new iPhone 3GS bootroms and iOS 4.2.1 yet, so you should stay at iOS 4.1.

Important: iPhone3GS users with old bootroms who want to go to 4.2.1 and unlock should not use this PwnageTool! Update to stock 4.2.1 first, then use new redsn0w to update your baseband.

Step One
Make a folder called "Pwnage" on the desktop. Download a couple of things:

Read the rest of this entry »

The iPhone Dev-Team has released RedSn0w 0.9.6b5 for unlockers stuck at the 05.14 or 05.15 basebands.

The new redsn0w 0.9.6beta5 is out.  It gives both Windows and OSX users the ability to flash the iPad 06.15 baseband on iPhone3G or iPhone3GS.  It fetches the baseband files directly from Apple for now (the only IPSW you ever point it at is the stock IPSW for the FW on your iPhone right now).  There may be a long delay while it’s doing this (their servers are currently getting pounded).

You can download the new version of RedSn0w here:

• Download version for Mac OS X:
  • http://sites.google.com/a/iphone-dev.com/files/home/redsn0w_mac_0.9.6b5.zip
  • https://iphoneroot.com/download/redsn0w_mac_0.9.6b5.zip
• Download version for Windows:
  • http://sites.google.com/a/iphone-dev.com/files/home/redsn0w_win_0.9.6b5.zip
  • https://iphoneroot.com/download/redsn0w_win_0.9.6b5.zip

Windows 7 and Vista users, please run redsn0w as Administrator in "XP Compatiblity Mode".

We will soon post step-by-step tutorials.

UPDATE: tutorial for iPhone 3G (Windows), tutorial for iPhone 3GS (Windows)

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

UPDATE: Обязательно (!) думайте перед тем, как что-нибудь сделать. Читайте внимательно и еще раз думайте. Не понятно - читайте снова. Спрашивайте до, а не после.

UPDATE 2: Если у вас 05.13 baseband и ниже - она ломается старыми способами, не надо обновляться до 05.14, 05.15 и 06.15. Хочется перейти на 4.1/4.2 - тогда делайте кастом прошивку с помощью pwnagetool.

UPDATE 3: Обновив версию baseband до iPad для анлока iPhone можно потерять GPS

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Данное пошаговое руководство позволит вам сделать джейлбрейк и анлок iPhone 3G на iOS 4.2.1 с помощью PwnageTool 4.1.3 под Mac OS X. Здесь также будут даны инструкции по обновлению baseband, если это необходимо для анлока (отвязки от оператора сотовой связи).

Для iPhone 3GS используйте руководство для iPhone 3GS.

Для пользователей Windows есть соответствующее пошаговое руководство.

Шаг 1
Создайте папку "Pwnage" на десктопе. Скачайте в нее все необходимое:

Read the rest of this entry »

This is the tweet from MuscleNerd posted a minute ago. So it is just minutes to wait for new unlock utility ultrasn0w.

UPDATE: New ultrasn0w released! New PwnageTool 4.1.3 released. Read carefully this post from DevTeam first, then reread again!

UPDATE 2: new ultrasn0w 1.2 supports the following basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

UPDATE 3: Step-by-step Tutorial: How to Jailbreak and Unlock

Read the rest of this entry »

MobileTerminal is a terminal emulator application for the iPad and iPhone. The version of MobileTerminal that is available in Cydia doesn't work with iPhone iOS 4.x and iOS 5.x. However there are beta versions that do work, but aren't on Cydia because they are still in beta stages. This tutorial will show you step-by-step how to install MobileTerminal on iPhone with iOS 4.x and iOS 5.x (tutorial for iPad is here). If you have old version of MobileTerminal installed - uninstall it in Cydia (Search - MobileTerminal - Remove).

First of all you need to jailbreak your iPhone. After you successfully jailbreaked iPhone:

1. Run Cydia by tapping on Cydia icon



2. The Cydia will start:

Read the rest of this entry »