News tagged ‘05.11’

This is step-by-step instructions on how to perform jailbreak of your iPhone 3GS on iOS 5 firmware using RedSn0w 0.9.9b6 for Mac OS X.

If you need unlock Redsn0w will provide you with choice of updating your baseband to 06.15.

Important: If you need unlock and have 05.13 baseband or lower - do not update to Apple firmware, use RedSn0w or Sn0wBreeze to create custom firmware!

If you have iPhone 3GS with an old bootrom version 359.3, the jailbreak is untethered. If your device has bootrom version 359.3.2 and higher, jailbreak will be tethered. You can detect your bootrom version using this tutorial.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.

Read the rest of this entry »

This is step-by-step instructions on how to perform jailbreak of your iPhone 3GS on iOS 5 firmware using RedSn0w 0.9.9b6 for Windows.

If you need unlock Redsn0w will provide you with choice of updating your baseband to 06.15.

Important: If you need unlock and have 05.13 baseband or lower - do not update to Apple firmware, use RedSn0w or Sn0wBreeze to create custom firmware!

If you have iPhone 3GS with an old bootrom version 359.3, the jailbreak is untethered. If your device has bootrom version 359.3.2 and higher, jailbreak will be tethered. You can detect your bootrom version using this tutorial.

Tethered jailbreak means that each time you restart your device you will need to connect it to a computer and run redsn0w.

Read the rest of this entry »

The iPhone Dev-Team has released an update to their UltraSn0w unlock bringing support for iOS 5. Remember that NO new basebands are supported in this release. It only adds support for iOS 5 with old basebands.

Here is the list of supported basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

If have one of the above baseband version and need unlock you can upgrade to iOS 5 without updating your baseband using RedSn0w 0.9.9b5 or Sn0wBreeze 2.8b8.

Ultrasn0w 1.2.4 is available in Cydia.

Read the rest of this entry »

Using this tutorial you will be able to untether jailbreak iOS 4.3.3 running on iPhone 4. This tutorial uses Sn0wBreeze 2.7.3 for Windows.

Sn0wBreeze will also preserve baseband version if you need carrier unlock.

Read the rest of this entry »

Using this tutorial you will be able to untether jailbreak iOS 4.3.3 running on iPhone 3GS. This tutorial uses Sn0wBreeze 2.7.3 for Windows.

Sn0wBreeze will also preserve baseband version if you need carrier unlock. If you have updated the baseband to version 06.15, you can use this tutorial to update to iOS 4.3.3. If you have iPhone 3GS and need to update baseband to 06.15, you can do it too (may disable your GPS).

Read the rest of this entry »

Using this tutorial you will be able to untether jailbreak iOS 4.3.3 running on iPhone 4. Pwnagetool will also preserve baseband version if you need carrier unlock. This tutorial uses PwnageTool 4.3.3.1 for Mac OS X.

Read the rest of this entry »

Using this tutorial you will be able to untether jailbreak iOS 4.3.3 running on iPhone 3GS. Pwnagetool will also preserve baseband version if you need carrier unlock. If you have updated the baseband to version 06.15, you can use this tutorial to update to iOS 4.3.3. This tutorial uses PwnageTool 4.3.3.1 for Mac OS X.

Read the rest of this entry »

The iPhone Dev-Team released an update to UltraSn0w that makes it compatible with iOS 4.3.1 for basebands previously unlocked. You can use ultrasn0w if you need carrier unlock and you have compatible baseband, preserved with pwnagetool, sn0wbreeze or tinyumbrella.

Ultrasn0w 1.2.1 supports only the following basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

You can install ultrasn0w via Cydia.

Here are DevTeam comments:

Read the rest of this entry »

The iPhone Dev-Team has recently announced that they've managed to fix UltraSn0w issues with iOS 4.3.1. They still want to test it on various devices before releasing.

This update is for those who are on an unlockable baseband. For users who used PwnageTool 4.3 or Sn0wBreeze 2.5 to update iPhone firmware. This will not add any new basebands to unlockable list.

Ultrasn0w supports the following basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

MuscleNerd tweet:

Read the rest of this entry »

UPDate: Attention! We've received info, that Apple stopped signing iOS 4.2 for devices for which iOS 4.3 is available. This means you will not be able to restore to 4.2.1 without saved SHSH keys.

UPDATE: Please, consider reading our Jailbreak & Unlock FAQ, especially if you have questions or troubles.

Using this tutorial you will be able to jailbreak iOS 4.2.1 running on iPhone 3G, iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad. Pwnagetool will also preserve baseband version if you need carrier unlock. If you have updated the baseband to version 06.15, you can use this tutorial. This tutorial uses  PwnageTool 4.2 for Mac OS X.

We are not developers of jailbreak utilities, so we cannot assure that everything will work just fine. However we tried this tutorial on several devices and succeeded.

We will use iPhone 4 in our jailbreak tutorial. The process is the same for all devices.

Step One
Make a folder called "Pwnage" on the desktop. Download a couple of things:

Read the rest of this entry »

This is the tweet from MuscleNerd posted a minute ago. So it is just minutes to wait for new unlock utility ultrasn0w.

UPDATE: New ultrasn0w released! New PwnageTool 4.1.3 released. Read carefully this post from DevTeam first, then reread again!

UPDATE 2: new ultrasn0w 1.2 supports the following basebands:

• iPhone 4: 01.59.00
• iPhone 3G/3GS: 04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00.

UPDATE 3: Step-by-step Tutorial: How to Jailbreak and Unlock

Read the rest of this entry »

DevTeam finally released iPhone 4 unlock software. The new version 1.0-1 of ultrasn0w now works for:

• iPhone4 baseband 01.59
• iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01 and 05.13.04

To install run Cydia and add the repo:  repo666.ultrasn0w.com

Good news from DevTeam. They just announced via twitter that unlock for firmwares 3.1.3 and 4.0 is ready:

RT @MuscleNerd: ultrasn0w tips: 1) Works for all basebands since 3.0 FW 2) Remember to disable 3G on T-Mobile USA

ultrasn0w 0.93 released! Cydia repo is repo666.ultrasn0w.com. Works with basebands 04.26.08 thru 05.13.04

This means, that all users with basebands 04.26.08, 05.11.07, 05.12.01 and 05.13.04 can use ultrasn0w 0.93.

There is no jailbreak for just released iOS4, so you need to wait a bit. Firmware 3.1.3 who need unlock can update ultrasn0w and use their iPhones with any carrier.

Read the rest of this entry »

The BlackSn0w Unlock utility by Geohot has been updated by MSFTGuy and PushFix to work with the latest firmware 3.1.3. However it works only with baseband 05.11.07 (!!!).

This modified version of BlackSn0w works for iPhones upgraded with PwnageTool or Sn0wbreeze, preserving the baseband version 05.11.07. Users who have updated to OS 3.1.3 by any other method have the 05.12.01 baseband so BlackSn0w and UltraSn0w will not work.

This new version of BlackSn0w will be very useful for iPhone 3GS OS 3.1.3 / Baseband 05.11.07 users who can’t downgrade to earlier versions but still need unlock.

According to iHackintosh, this new version also fixes a small bug making WiFi much more stable.

Blacksn0w RC2 will be available on ModMyi repo soon. If you don't want to wait just add the source http://cydia.pushfix.info/ to Cydia and install it now.

Important: Blacksn0w for 3.1.3 is still in RC stage and there may be some issues or bugs. This is not an official update performed by Geohot, who has clearly indicated that he will not be updating any tools for the 3.1.3 firmware.

A few days ago in an IRC channel the DevTeam and GeoHot discussed and summarized the state of the exploits found in the new baseband 05.12.01 in firmware 3.1.3. GeoHot explains that an exploit that had previously discovered and used in blacksn0w is still present in the new firmware released by Apple. It appears that both he and MuscleNerd are working on the same exploit, and if this were true, it would be a really good start to team up and release a new unlock tool.

Here is their discussion:

< visnet_ > What does geohot tweet mean?
< %geohot > its my bb exploit for safekeeping
< %Par4doX > geohot: did you turn that over to the dev team or are you doing something with it?
< %geohot > my days of turning things over are done
< %geohot > i hope its different from the one they have
< %geohot > but they prob already have it
< %geohot > its the one i orig wanted to release blacksn0w with
< %Par4doX > it’s still there in the new bb
< %geohot > yep, just checked
< %geohot > but then opted to use xemn since it was public
< Evan > Oo, it carries over from 05.11 to 05.12?
< %geohot > why wouldn’t it, apple doesn’t fix things proactivly
< @MuscleNerd > geohot we prob should figure out a way to know if we have same exploit double blind, otherwise we may release 2 different ones at same time
< %geohot > any suggestions?
< @MuscleNerd > not sure how to do that without making it easy to brute force tho
< %geohot > yea, i salted the hash
< @MuscleNerd > yeah
< @MuscleNerd > hmm maybe if we both hash the stack dump
< @Confucious > Can you two take this out of public sight?
< @MuscleNerd > the stack itself, not the header before it or the registers after it
< Her > muscle: any notice about the exploits are the same ?
< %geohot > we are working on it
< %geohot > cryptography, perfect for people who don’t trust each other

We should not expect much for the firmware 3.1.3 since the rumors predict the firmware 3.2 for mid-March. However these news are really good for owners of locked devices.